/Arduino-Oregon-Library

To decode data from Oregon Sensors

Primary LanguageC++MIT LicenseMIT

Arduino Oregon Library:

##Tested Hardware:

  • Arduino UNO
  • 433Mhz receiver (connected on digital pin 2)
  • Oregon sensors THGR228N

Example without MySensors:

Serial output:

Brute Hexadecimal data from sensor:
1A2D10E2711860043CDA
Oregon ID: 226 Hexadecimal: E2
Sensor ID: 226 has been find in position EEPROM: 0
Oregon model: THGR228N
Oregon channel: 1
Oregon temperature: 18.70
Oregon humidity: 46
Oregon battery level: 90

----

Brute Hexadecimal data from sensor:
1A2D10B4201340052F43
Oregon ID: 180 Hexadecimal: B4
Sensor ID: 180 has been find in position EEPROM: 1
Oregon model: THGR228N
Oregon channel: 1
Oregon temperature: 13.20
Oregon humidity: 54
Oregon battery level: 90

Example with MySensors library (www.mysensors.org):

Serial output:

Brute Hexadecimal data from sensor:
1A2D10E2711860043CDA
Oregon ID: 226 Hexadecimal: E2
Sensor ID: 226 has been find in position EEPROM: 0
Oregon model: THGR228N
Oregon channel: 1
Oregon temperature: 18.70
send: 10-10-0-0 s=0,c=1,t=0,pt=7,l=5,sg=0,st=ok:18.7
Oregon humidity: 46
send: 10-10-0-0 s=0,c=1,t=1,pt=7,l=5,sg=0,st=ok:46.0
Oregon battery level: 90
send: 10-10-0-0 s=0,c=1,t=24,pt=7,l=5,sg=0,st=ok:90.0

----

Brute Hexadecimal data from sensor:
1A2D10B4201340052F43
Oregon ID: 180 Hexadecimal: B4
Sensor ID: 180 has been find in position EEPROM: 1
Oregon model: THGR228N
Oregon channel: 1
Oregon temperature: 13.20
send: 10-10-0-0 s=1,c=1,t=0,pt=7,l=5,sg=0,st=ok:13.2
Oregon humidity: 54
send: 10-10-0-0 s=1,c=1,t=1,pt=7,l=5,sg=0,st=ok:54.0
Oregon battery level: 90
send: 10-10-0-0 s=1,c=1,t=24,pt=7,l=5,sg=0,st=ok:90.0

Result on OpenHAB controller (With MySensors)

Logo