mochad_dispatch

mochad_dispatch allows you to connect your X10 security devices (door/window sensors, motion sensors, remotes) to home automation software like OpenHAB, Home Assistant or Domoticz

What exactly does it do?

mochad_dispatch connects to mochad (which reads messages from a USB receiver like the X10 CM15a) and listens for X10 security messages then publishes those to an MQTT broker.

It will automatically reconnect to both mochad and the MQTT broker. However, if a reconnect attempt fails for 60 seconds straight, mochad_dispatch will give up and exit.

How do I use it?

Run mochad_dispatch with a mochad hostname and a MQTT URI

$ mochad_dispatch -s hal9000 mqtt://mqtt.example.com:1883

Then subscribe to the appropriate device topics. The general format is

X10/MOCHAD_HOST/security/ADDRESS

What about MQTT with TLS?

For TLS support use the '--cafile' option like so

$ mochad_dispatch -s hal9000 --cafile /etc/pki/tls/cert.pem mqtt://mqtt.example.com:8883

Troubleshooting

mochad_dispatch has been tested with mochad 0.1.16 and Mosquitto 1.4.3

Start by making sure your MQTT broker is relaying X10 messages by subscribing to the topic

X10/#

For example, using the mosquitto broker:

$ mosquitto_sub -v -t X10/#
X10/hal9000/security/C8:21:B2 {"dispatch_time": "2016-02-18T18:36:12.147877+00:00", "func": {"event_type": "contact", "event_state": "normal", "device_type": "DS10A", "delay": "min"}}
X10/hal9000/security/33:8C:30 {"dispatch_time": "2016-02-18T18:30:42.763780+00:00", "func": {"event_state": "normal", "device_type": "DS10A", "delay": "min", "event_type": "contact"}}

Dockerized App

Build the docker image (using the Dockerfile based on the jfloff/alpine-python image) and run the mochad_dispatch command. IMPORTANT: you must use the "-f" flag (to disable background/daemon mode) else the docker container will exit immediately.

$ docker build -t mochad_dispatch .
$ docker run -d -it mochad_dispatch mochad_dispatch -s hal9000 mqtt://mqtt.example.com:1883 -f

Dockerized App Full Stack Example

Run (and background) individual Docker containers to provide an MQTT broker, a MOCHAD daemon, and a MOCHAD_DISPATCH instance (assuming you've already built an image as described above):

$ docker run -d --name=mosquitto -p 1883:1883 -p 9001:9001 sourceperl/mosquitto
$ docker run -d --name=mochad -p 1099:1099 --device "/dev/bus/usb/005" jshridha/mochad:latest
$ docker run --link mosquitto --link mochad:hal9000 -d -it mochad_dispatch mochad_dispatch -s hal9000 mqtt://mosquitto:1883 -f