OpenResty Docker Container
This container aims to be a generic proxy layer for your web services. It includes OpenResty with Lua and NAXSI filtering compiled in.
Getting Started
In this section I'll show you some examples of how you might run this container with docker.
Prerequisites
In order to run this container you'll need docker installed.
Usage
Environment Variables
Multi-location Variables
Variables to control how to configure the proxy (can be set per location, see Using Multiple Locations).
PROXY_SERVICE_HOST
- The upstream host you want this service to proxy.PROXY_SERVICE_PORT
- The port of the upstream host you want this service to proxy.NAXSI_RULES_URL_CSV
- A CSV of Naxsi URL's of files to download and use. (Files must end in .rules to be loaded)NAXSI_RULES_MD5_CSV
- A CSV of md5 hashes for the files specified aboveEXTRA_NAXSI_RULES
- Allows NAXSI rules to be specified as an environment variable. This allows one or two extra
rules to be specified without downloading or mounting in a rule file.NAXSI_USE_DEFAULT_RULES
- If set to "FALSE" will delete the default rules file.ENABLE_UUID_PARAM
- If set to "FALSE", will NOT add a UUID url parameter to all requests. The Default will add this for easy tracking in down stream logs e.g.nginxId=50c91049-667f-4286-c2f0-86b04b27d3f0
.CLIENT_CERT_REQUIRED
- if set toTRUE
, will deny access at this location, see Client Certs.ERROR_REDIRECT_CODES
- Can override when Nginx will redirect requests to the error page. Defaults to "500 501 502 503 504
"ADD_NGINX_LOCATION_CFG
- Arbitrary extra NGINX configuration to be added to the location context, see Arbitrary Config.PORT_IN_HOST_HEADER
- If FALSE will remove the port from the httpHost
header.
Single set Variables
Note the following variables can only be set once:
ADD_NGINX_SERVER_CFG
- Arbitrary extra NGINX configuration to be added to the server context, see Arbitrary ConfigLOCATIONS_CSV
- Set to a list of locations that are to be independently proxied, see the example Using Multiple Locations. Note, if this isn't set,/
will be used as the default location.LOAD_BALANCER_CIDR
- Set to preserve client IP addresses. Important, to enable, see Preserve Client IP.NAME_RESOLVER
- Can override the default DNS server used to re-resolve the backend proxy (based on TTL). The Default DNS Server is the first entry in the resolve.conf file in the container and is normally correct and managed by Docker or Kubernetes.CLIENT_MAX_BODY_SIZE
- Can set a larger upload than Nginx defaults in MB.HTTPS_REDIRECT_PORT
- Only required for http to https redirect and only when a non-standard https port is in use. This is useful when testing or for development instances or when a load-balancer mandates a non-standard port.LOG_FORMAT_NAME
- Can be set totext
orjson
(default).SERVER_CERT
- Can override where to find the server's SSL cert.SERVER_KEY
- Can override where to find the server's SSL key.SSL_CIPHERS
- Change the SSL ciphers support default only AES256+EECDH:AES256+EDH:!aNULLSSL_PROTOCOLS
- Change the SSL protocols supported default only TLSv1.2HTTP_LISTEN_PORT
- Change the default inside the container from 80.HTTPS_LISTEN_PORT
- Change the default inside the container from 443.
Ports
This container exposes
80
- HTTP443
- HTTPS
N.B. see HTTP(S)_LISTEN_PORT above
Useful File Locations
nginx.conf
is stored at/usr/local/openresty/nginx/conf/nginx.conf
/etc/keys/crt
&/etc/keys/key
- A certificate can be mounted here to make OpenResty use it. However a self signed one is provided if they have not been mounted./etc/keys/client-ca
If a client CA is mounted here, it will be loaded and configured. SeeCLIENT_CERT_REQUIRED
above in Environment Variables./usr/local/openresty/naxsi/*.conf
- Naxsi rules location in default nginx.conf./usr/local/openresty/nginx/html/50x.html
- HTML displayed when a 500 error occurs. See ERROR_REDIRECT_CODES to change this.
Examples
Self signed SSL Certificate
docker run -e 'PROXY_SERVICE_HOST=http://stackexchange.com' \
-e 'PROXY_SERVICE_PORT=80' \
-p 8443:443 \
quay.io/ukhomeofficedigital/nginx-proxy:v1.0.0
Custom SSL Certificate
docker run -e 'PROXY_SERVICE_HOST=http://stackexchange.com' \
-e 'PROXY_SERVICE_PORT=80' \
-p 8443:443 \
-v /path/to/key:/etc/keys/key:ro \
-v /path/to/crt:/etc/keys/crt:ro \
quay.io/ukhomeofficedigital/nginx-proxy:v1.0.0
Preserve Client IP
This proxy supports Proxy Protocol.
To use this feature you will need:
- To enable proxy protocol on your load balancer.
For AWS, see Enabling Proxy Protocol for AWS. - Find the private address range of your load balancer.
For AWS, this could be any address in the destination network. E.g. if you have three compute subnets defined as 10.50.0.0/24, 10.50.1.0/24 and 10.50.2.0/24, then a suitable range would be 10.50.0.0/22 see CIDR Calculator.
docker run -e 'PROXY_SERVICE_HOST=http://stackexchange.com' \
-e 'PROXY_SERVICE_PORT=80' \
-e 'LOAD_BALANCER_CIDR=10.50.0.0/22' \
-p 8443:443 \
quay.io/ukhomeofficedigital/nginx-proxy:v1.0.0
Extra NAXSI Rules from Environment
The example below allows large documents to be POSTED to the /documents/uploads and /documents/other_uploads locations. See Whitelist NAXSI rules for more examples.
docker run -e 'PROXY_SERVICE_HOST=http://myapp.svc.cluster.local' \
-e 'PROXY_SERVICE_PORT=8080' \
-e 'EXTRA_NAXSI_RULES=BasicRule wl:2 "mz:$URL:/documents/uploads|BODY";
BasicRule wl:2 "mz:$URL:/documents/other_uploads|BODY";' \
-p 8443:443 \
quay.io/ukhomeofficedigital/nginx-proxy:v1.0.0
Using Multiple Locations
When the LOCATIONS_CSV option is set, multiple locations can be proxied. The settings for each proxy location can be controlled with the use of any Multi-location Variables by suffixing the variable name with both a number, and the '_' character, as listed in the LOCATIONS_CSV variable.
Two servers
The example below configures a simple proxy with two locations '/' (location 1) and '/api' (location 2):
docker run -e 'PROXY_SERVICE_HOST_1=http://stackexchange.com' \
-e 'PROXY_SERVICE_PORT_1=80' \
-e 'PROXY_SERVICE_HOST_2=https://api.svc.cluster.local' \
-e 'PROXY_SERVICE_PORT_2=8888' \
-e 'LOCATIONS_CSV=/,/api' \
-p 8443:443 \
quay.io/ukhomeofficedigital/nginx-proxy:v1.0.0
For more detail, see the generated config.
One Server, Multiple locations
The example below will proxy the same address for two locations but will disable the UUID (nginxId) parameter for the /about location only.
See the generated config for below:
docker run -e 'PROXY_SERVICE_HOST=http://stackexchange.com' \
-e 'PROXY_SERVICE_PORT=80' \
-e 'LOCATIONS_CSV=/,/about' \
-e 'ENABLE_UUID_PARAM_2=FALSE' \
-p 8443:443 \
quay.io/ukhomeofficedigital/nginx-proxy:v1.0.0
Client Certs
If a client CA certificate is mounted, the proxy will be configured to load it. If a client has the cert, the client CN will be set in the X-Username header and logged.
docker run -e 'PROXY_SERVICE_HOST=http://stackexchange.com' \
-e 'PROXY_SERVICE_PORT=80' \
-v "${PWD}/client_certs/ca.crt:/etc/keys/client-ca" \
-p 8443:443 \
quay.io/ukhomeofficedigital/nginx-proxy:v1.0.0
The following example will specifically deny access to clients without a cert:
docker run -e 'PROXY_SERVICE_HOST=http://serverfault.com' \
-e 'PROXY_SERVICE_PORT=80' \
-e 'LOCATIONS_CSV=/,/about' \
-e 'CLIENT_CERT_REQUIRED_2=TRUE' \
-v "${PWD}/client_certs/ca.crt:/etc/keys/client-ca" \
-p 8443:443 \
quay.io/ukhomeofficedigital/nginx-proxy:v1.0.0
See ./client_certs for scripts that can be used to generate a CA and client certs.
Arbitrary Config
The example below will return "ping ok" for the URL /ping.
docker run -e 'PROXY_SERVICE_HOST=http://stackexchange.com' \
-e 'PROXY_SERVICE_PORT=80' \
-e 'ADD_NGINX_LOCATION_CFG=if ($uri = /proxy-ping) return 200 "ping ok";' \
-p 8443:443 \
quay.io/ukhomeofficedigital/nginx-proxy:v1.0.0
The example below will return "404" for the URL /notfound.
docker run -e 'PROXY_SERVICE_HOST=http://stackexchange.com' \
-e 'PROXY_SERVICE_PORT=80' \
-e 'ADD_NGINX_SERVER_CFG=location /notfound { return 404; };' \
-p 8443:443 \
quay.io/ukhomeofficedigital/nginx-proxy:v1.0.0
Built With
- OpenResty - OpenResty (aka. ngx_openresty) is a full-fledged web application server by bundling the standard Nginx core, lots of 3rd-party Nginx modules, as well as most of their external dependencies.
- Nginx - The proxy server core software.
- ngx_lua - Embed the power of Lua into Nginx
- Naxsi - NAXSI is an open-source, high performance, low rules maintenance WAF for NGINX
Find Us
Contributing
Feel free to submit pull requests and issues. If it's a particularly large PR, you may wish to discuss it in an issue first.
Please note that this project is released with a Contributor Code of Conduct. By participating in this project you agree to abide by its terms.
Versioning
We use SemVer for the version tags available See the tags on this repository.
Authors
- Lewis Marshal - Initial work - lewismarshall
See also the list of contributors who participated in this project.
License
This project is licensed under the MIT License - see the LICENSE.md file for details