miblooming/JZ-TS24-2

Wifi on JZ-TS35

Closed this issue · 11 comments

cabped commented

On the JZ-TS35 there is a connector for a WiFi extension module. I’ve searched the web but not found the specific module that goes with JZ-TS35. I was wondering if it would work with ESP-3D module (https://github.com/luc-github/ESP3D)? Case not, once ESP-3D also uses the Aux-1 in RAMPS there’s a alternative way to connect JZ-TS35? And also: which is the WiFi extension module compatible anyway?

miblooming commented

WIFI module：https://item.taobao.com/item.htm?id=581913421214
WIFIHelper for PC：https://github.com/miblooming/JZ-TS24-2/tree/master/JZHelper_ui_editor/JZ-TS35WIFI___(3.5)
This module is based on ESP32 with a custom firmwave for JZ-TS35.

  • 👍1
cabped commented
cabped commented

Got the module today. Works preatty fine. Fast connection for file transmition, much better than other solutions. However, if I may ask, I would request, if possible, implementing on the firmware a web server for access from other OS as Mac, as avaiable in ESP-3D module (https://github.com/luc-github/ESP3D). That would make JZ=TS35 cross platform on connections, and also allow remote monitoring of the printing process from outside local network. It would be very usefull also to add an open port to connect to the printer as a serial TCP/IP hub from Repetier Host, for example.

miblooming commented

Thinks for your feedback.
Good ideas, I'll try to develop those features.
And a cura plug for JZ-TS35 WIFI is under developing.

cabped commented
TAOGde commented

WIFI module：https://item.taobao.com/item.htm?id=581913421214
WIFIHelper for PC：https://github.com/miblooming/JZ-TS24-2/tree/master/JZHelper_ui_editor/JZ-TS35WIFI___(3.5)
This module is based on ESP32 with a custom firmwave for JZ-TS35.

Where can I find the custom firmware? your firmware version inside your https://github.com/miblooming/JZ-TS24-2/tree/master/JZHelper_ui_editor/JZ-TS35WIFI___(3.5) folder does not update for my ghost4 latest version. (board hardware version is 1.4) it hangs on 0% finish.

TAOGde commented

Here https://github.com/miblooming/JZ-TS24-2/tree/master/other/flyingbear

GREAT work, it works :)

Can I send you the German translation for your firmware? I am nativ speaking German and something looks wired to me in your translation.

than can I change with your tool for my ghost4 the gcode group commands?

regards Torsten

miblooming commented

1.translation
Yes, please edit this file for translation, and send back to me.

language-Deutsch.zip

2.gcode group
The firmwave of ghost4 is a custom version. Please use the UIEditor here:
https://github.com/miblooming/JZ-TS24-2/tree/master/other/FlyingBear_TS_WIFI/UIEditor

rustam-rezvanov commented

Thanks for the answer. Is it sold on eBay or AliExpress or other site that ships to outside China? Em 8 de mar de 2019, à(s) 08:01, Looming notifications@github.com escreveu:
…
WIFI module：https://item.taobao.com/item.htm?id=581913421214 WIFIHelper for PC：https://github.com/miblooming/JZ-TS24-2/tree/master/JZHelper_ui_editor/JZ-TS35WIFI___(3.5) This module is based on ESP32 with a custom firmwave for JZ-TS35. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or mute the thread.

Hi! Did you manage to find this module on AliExpress ?