miblooming/JZ-TS24-2

Issues

• Post bootloader or sources

  #47 opened 2 years ago by ffnull
  0

• Project abandoned?

  #46 opened 3 years ago by ffnull
  0

• display of chamber temperature

  #45 opened 4 years ago by dacentichka
  0

• heating schedule issue

  #44 opened 4 years ago by dacentichka
  1

• how to increase the transfer speed over Wi-Fi

  #43 opened 4 years ago by dacentichka
  5

• Can't update firmware

  #42 opened 4 years ago by iemroger
  0

• Temp variable

  #41 opened 4 years ago by fnhhnxfn
  0

• Pause feature

  #39 opened 5 years ago by Super-Matter
  2

• Please add 500 000 baud rate

  #40 opened 4 years ago by Pilson66
  0

• MKS TFT 3.5 V1.0 Port

  #38 opened 5 years ago by ffnull
  0

• Blank white screen after splash screen

  #35 opened 5 years ago by Mayoogh
  2

• Variable for Leveling

  #37 opened 5 years ago by Sacred-Shadow
  0

• Translation directly on Git

  #36 opened 5 years ago by Sacred-Shadow
  0

• Wifi not work on 3.8.0fw

  #34 opened 5 years ago by Yandex-an
  5

• Cura plugin failure when trying to send file

  #33 opened 5 years ago by Pilson66
  5

• Please update russian translation.

  #32 opened 5 years ago by Pilson66
  11

• New menue for IDEX or DUAL_X_CARRIAGE Printer

  #18 opened 5 years ago by RV3Dtech
  2

• There is no way to change the print head auto-home Gcode

  #31 opened 5 years ago by Pilson66
  4

• Printing freezes on round corners and cylinders

  #30 opened 5 years ago by mziai
  34

• Auto-repeat time of touch events on the JZ-TS35 display

  #24 opened 5 years ago by Pilson66
  23

• Bad positioning back Z when pause, power off or end-of-filament

  #11 opened 5 years ago by cabped
  13

• wifi module

  #20 opened 5 years ago by alexxxdev
  3

• API documentation

  #25 opened 5 years ago by tuzkov
  5

• Plugin [FlyingBearPlugin] with supported sdk versions [['6.0.0', '6.0.0']] is incompatible with the current sdk version [7.0.0].

  #27 opened 5 years ago by TAOGde
  2

• JZ-TS40 BabbyStepping

  #21 opened 5 years ago by ffnull
  11

• Auto power off bug

  #26 opened 5 years ago by lowv
  1

• Endstop monitoring triggers BLTouch to deploy probe

  #19 opened 5 years ago by mziai
  6

• Problem with Leveling with JZ-TS28 and others question

  #28 opened 5 years ago by Sharkys80
  8

• tft38

  #29 opened 5 years ago by vzagranichnyy
  7

• Where can I find changelog?

  #23 opened 5 years ago by Pilson66
  1

• Error in firmware version on last commit.

  #22 opened 5 years ago by Pilson66
  1

• Wifi on JZ-TS35

  #7 opened 6 years ago by cabped
  11

• control signal to a outside camera per layer ?

  #14 opened 5 years ago by fred2088
  4

• Buttons for Filament Load/Unload at Extruder Menu

  #9 opened 5 years ago by RV3Dtech
  1

• Backlight control.

  #16 opened 5 years ago by DrOnJD
  5

• JZ-TS35WIFI__(3.5)_portrait mode

  #17 opened 5 years ago by edsant1812
  4

• Filament Unload at End of Printing

  #8 opened 5 years ago by RV3Dtech
  1

• Cura plugin

  #13 opened 5 years ago by TAOGde
  1

• TS24 without hotbed ?

  #15 opened 5 years ago by fred2088
  2

• No Wifi after Update

  #12 opened 5 years ago by TAOGde
  1

• Wrong Z positioning after end of filament

  #10 opened 5 years ago by cabped
  1

• Manual encoder, how can it be connected?

  #6 opened 6 years ago by sb43201
  1

• adding gcode to button tiles

  #4 opened 6 years ago by mikemayhak
  2

• ATX power supply and encoder

  #2 opened 6 years ago by jhnf
  1

• Support russian language?!?

  #1 opened 6 years ago by jhnf
  8

• Smart display for CNC milling machine

  #5 opened 7 years ago by zagranichnyy
  5

• Not display temperature

  #3 opened 8 years ago by DaGov
  11