Yet Another Parametric Projectbox generator
You can find the complete and official documentation here
If you have questions please place them in a comment at the "Yet Another Parametric Projectbox generator" (English) or at the "Nog een geparametriseerde projectbox generator" (Dutch).
New functionality lightTubes (experimental)
With the lightTubes array you can define where you want tubes for LED's and NeoPixles**
//-- lightTubes -- origin is pcb[0,0,0]
// (0) = posx
// (1) = posy
// (2) = tubeLength
// (3) = tubeWidth
// (4) = tubeWall
// (5) = abovePcb
// (6) = tubeType {yappCircle|yappRectangle}
lightTubes = [
//--- 0, 1, 2, 3, 4, 5, 6
[84.5, 21, 3, 6, 1, 4, yappRectangle]
, [30, 21, 5, 0, 1, 2, yappCircle]
];
posx - the position of the center of the led on the X-axes of the PCB posy - the position of the center of the led on the Y-axes of the PCB tubeLength - the length of the tube (if yappRectangle) or the diameter of the tube (if yappCircle) tubeWidth - the width of the tube (not used if yappCircle) tubeWall - the width of the wall around the led abovePcp - how hight the tube will begin with respect to the top of the PCB tubeType - whether the led shows as a circle (yappCircle) or a rectangle (yappRectangle)
New functionality pushButtons (experimental)
With the pushButtons array you can define where you want button guides for tactile switches.
//-- pushButtons -- origin is pcb[0,0,0]
// (0) = posx
// (1) = posy
// (2) = capLength
// (3) = capWidth
// (4) = capAboveLid
// (5) = switchHeight
// (6) = switchTrafel
// (7) = poleDiameter
// (8) = buttonType {yappCircle|yappRectangle}
pushButtons = [
[15, 30, 8, 8, 0, 1, 1, 3.5, yappCircle]
, [15, 10, 8, 6, 2, 4.5, 1, 3.5, yappRectangle]
];
The "Plate" has to be glued to the "Pole".
posx - the position of the center of the tacktile switch on the PCB posy - the position of the center of the tacktile switch on the PCB capLength - the length of the button (if yappRectangle) or the diameter (if yappCircle) capWidth - the width of the button (if yappRectangle, otherwise ignored) capAboveLid - how much the button cap is above the lid switchHeight - the height of the tactile switch switchTrafel - the distance the button has to trafel to activate the tacktile switch poleDiameter - the diameter of the pole that connects the button cap with the plate buttonType - either yappCircle or yappRectangle
This version breaks with the API for the following array's:
- pcbStand[..] (extra parameter for standoffHeight)
- connectors[..] (extra parameter for baseConnector Height)
//-- pcb_standoffs -- origin is pcb[0,0,0]
// (0) = posx
// (1) = posy
// (2) = standoffHeight
// (3) = flangeHeight
// (4) = flangeDiameter
// (5) = { yappBoth | yappLidOnly | yappBaseOnly }
// (6) = { yappHole, YappPin }
// (7) = { yappAllCorners | yappFrontLeft | yappFrondRight | yappBackLeft | yappBackRight }
pcbStands = [
[3, 3, 5, 3, 11, yappBoth, yappPin, yappAllCorners]
,[5, 5, 5, 4, 10, yappBoth, yappPin, yappBackLeft, yappFrontRight]
,[8, 8, 5, 4, 11, yappBoth, yappPin]
,[pcbLength-15, pcbWidth-15, 8, 4, 12, yappBoth, yappPin]
];
//-- connectors
//-- normal : origen = box[0,0,0]
//-- yappConnWithPCB: origen = pcb[0,0,0]
// (0) = posx
// (1) = posy
// (2) = pcbStandHeight
// (3) = screwDiameter
// (4) = screwHeadDiameter
// (5) = insertDiameter
// (6) = outsideDiameter
// (7) = flangeHeight
// (8) = flangeDiam
// (9) = { yappConnWithPCB }
// (10) = { yappAllCorners | yappFrontLeft | yappFrondRight | yappBackLeft | yappBackRight }
connectors = [
[ 8, 8, 5, 2.5, 2.8, 3.8, 6, 6, 15, yappAllCorners]
, [28, 58, 5, 2.5, 2.8, 3.8, 6, 6, 25, yappConnWithPCB]
];
This version breaks with the API for the following array's:
- pcbStand[..] (extra parameter for flange)
- connectors[..] (huge change lots of extra parameters)
- connectosPCB[..] (removed)
//-- pcb_standoffs -- origin is pcb[0,0,0]
// (0) = posx
// (1) = posy
// (2) = flangeHeight
// (3) = flangeDiameter
// (4) = { yappBoth | yappLidOnly | yappBaseOnly }
// (5) = { yappHole, YappPin }
// (6) = { yappAllCorners | yappFrontLeft | yappFrondRight | yappBackLeft | yappBackRight }
pcbStands = [
[3, 3, 3, 11, yappBoth, yappPin, yappAllCorners]
,[5, 5, 4, 10, yappBoth, yappPin, yappBackLeft, yappFrontRight]
,[8, 8, 4, 11, yappBoth, yappPin]
,[pcbLength-15, pcbWidth-15, 4, 12, yappBoth, yappPin]
];
//-- connectors
//-- normal : origen = box[0,0,0]
//-- yappConnWithPCB: origen = pcb[0,0,0]
// (0) = posx
// (1) = posy
// (2) = screwDiameter
// (3) = screwHeadDiameter
// (4) = insertDiameter
// (5) = outsideDiameter
// (6) = flangeHeight
// (7) = flangeDiam
// (8) = { yappConnWithPCB }
// (9) = { yappAllCorners | yappFrontLeft | yappFrondRight | yappBackLeft | yappBackRight }
connectors = [
[8, 8, 2.5, 2.8, 3.8, 6, 6, 15, yappAllCorners]
, [28, 58, 2.5, 2.8, 3.8, 6, 6, 25, yappConnWithPCB]
];
The depth of the screw in the connectors is now depending on the standoffHeight so the
screw size does not change anymore.
- new cutoutGrills array
//-- cutoutGrills -- origin is box[x0,y0]
// (0) = xPos
// (1) = yPos
// (2) = grillWidth
// (3) = grillLength
// (4) = gWidth
// (5) = gSpace
// (6) = gAngle
// (7) = plane [ "base" | "lid" ]
// (8) = {polygon points} (optional)
cutoutGrills = [
[22, 22, 90, 90, 2, 3, 50, "base", [ [0,15],[20,15],[30,0],[40,15],[60,15]
,[50,30],[60,45], [40,45],[30,60]
,[20,45], [0,45],[10,30] ]
]
,[15, 10, 50, 10, 2, 3, -20, "base"]
,[15, 15, 10, 50, 2, 3, -45, "lid"]
,[15, 85, 50, 10, 2, 3, 20, "base"]
,[85, 15, 10, 50, 2, 3, 45, "lid"]
];
Be aware: this functionality needs a huge amount of rendering elements.
You can set this at Preferences->Advanced->Turn of rendering at 100000 elements
- Various bug-fixes
- Connectors now have a flange at the basePlane and lidPlane for a better adhesion
This release breaks with previous releases in the extra parm "depth" in the labels array!!
The labels now have this syntax:
//-- origin of labels is box [0,0,0]
// (0) = posx
// (1) = posy/z
// (2) = orientation
// (3) = depth
// (4) = plane {lid | base | left | right | front | back }
// (5) = font
// (6) = size
// (7) = "label text"
Example:
labelsPlane = [
[10, 10, 0, 0.6, "lid", "Liberation Mono:style=bold", 15, "YAPP" ]
,[100, 90, 180, 0.8, "base", "Liberation Mono:style=bold", 11, "Base" ]
,[8, 8, 0, 1.0, "left", "Liberation Mono:style=bold", 7, "Left" ]
,[10, 5, 0, 1.2, "right", "Liberation Mono:style=bold", 7, "Right" ]
,[40, 23, 0, 1.5, "front", "Liberation Mono:style=bold", 7, "Front" ]
,[5, 5, 0, 2.0, "back", "Liberation Mono:style=bold", 8, "Back" ]
];
For your box to work with this release as before you have to add this extra parm (as "wallThickness/2", "basePlaneThickness/2" or "lidPlaneThickness/2").
Thanks to Keith Hadley
There now is a new array for connectors that holds the PCB. This array is called "connectorsPCB".
//-- connectorsPCB -- origin = pcb[0,0,0]
// (0) = posx
// (1) = posy
// (2) = screwDiameter
// (3) = insertDiameter
// (4) = outsideDiameter
// (5) = { yappAllCorners }
Example:
connectorsPCB = [
[pcbLength/2, 10, 2.5, 3.8, 5]
,[pcbLength/2, pcbWidth-10, 2.5, 3.8, 5]
];
It takes in account the "pcbThickness" to calculate the hight of the lid-connector.
Thanks to Oliver Grafe
This release breaks with previous releases in the extra parm "angle" in all the cutouts array's!!!
All plane array's now have this syntax:
//-- plane -- origin is pcb[0,0,0]
// (0) = posx
// (1) = posy
// (2) = width
// (3) = length
// (4) = angle
// (5) = { yappRectangle | yappCircle }
// (6) = { yappCenter }
For your box to work with this release you have to add this extra parm (as "0") to all your cutOut-array-row's
See: This Post (English) or This Post (in Dutch)
I have done my best but it can probably be done simpler. So, if you think you can help please contact me or make a Merge Request.
I want rounded corners! Do you have an idear howto do that??(done)modules (Hooks) that can be (re)defined by the user (almost there ;-))(done)screw connector between the top- and bottomPlanes (for bigger boxes)(done)snap-ons in the ridges(done)Rotate rectangular cutOuts (orientation)v1.4Connectors that holds the PCB in placev1.5 (Oliver Grafe)Variable depth of labelsv1.5 (Keithe Hadley)- anything else? Anyone?
It all starts with some dimensions of the pcb you want your Project Box for and some other dimensions:
printBaseShell = true;
printLidShell = true;
// Edit these parameters for your own board dimensions
wallThickness = 1.0;
basePlaneThickness = 1.0;
lidPlaneThickness = 1.0;
// Total height of box = basePlaneThickness + lidPlaneThickness
// + baseWallHeight + lidWallHeight
baseWallHeight = 7;
lidWallHeight = 4;
pcbLength = 88;
pcbWidth = 49;
pcbThickness = 1.5;
// padding between pcb and inside wall
paddingFront = 4;
paddingBack = 1;
paddingRight = 1;
paddingLeft = 1;
// ridge where Base- and Lid- off the box can overlap
// Make sure this isn't less than lidWallHeight
ridgeHeight = 3;
ridgeSlack = 0.2;
roundRadius = 2.0; // don't make this to big..
//-- How much the PCB needs to be raised from the base
//-- to leave room for solderings and whatnot
standoffHeight = 5.0;
pinDiameter = 1.0;
pinHoleSlack = 0.5;
standoffDiameter = 4;
You probably want some cutouts in your box for connectors and stuff. For every plane (side) of the Project Box there is an array that holds the cutouts for that plane.
These examples are made with Rev. 1.3!
For Rev. 1.4 to work you need to add the extra parm angle in all cutouts array's!!
A picture is worth a thousand words ...
pcbStands fixate the PCB between the base and the lid.
Inserts are great for making a screw connection between the base and the lid.
Thats it! Press F5 or F6 to see the results of your work!
There are two type of "hooks"; at the inside of the box or at the outside of the box
If you like this project or it saved you time, you can give me a cup of coffee :)
