This is a work in progress.
The large encoder (main encoder) adjusts the frequency of either the A or B VFO as selected by the VFO button. The stepping of the VFO tuning is controlled by the STEP button.
The small encoder (sub-encoder) controls the AF, IF, LOW, HIGH, MIC, COMP, WPM, PITCH and PWR settings.
Click on the desired button, the value will highlight in yellow and the sub-encoder will adjust the value. After 10 seconds of sub-encoder inactivity, the highlight will return to the AF and the sub-encoder will adjust the AF (default) value.
- AF: range 0 .. 100 (step size 1)
- IF: range 0 .. 100 (step size 1)
- LOW: range 0 .. 50 Hz below the HIGH setting (step size 50)
- HIGH: range 50 Hz above the LOW setting .. 4000 (step size 50)
- MIC: range 0 .. 100 (step size 1)
- COMP: range 0 .. 100 (step size 1)
- WPM: range 5 .. 40 (step size 1)
- PITCH: range 300 .. 1500 (step size 10)
- PWR: range 0 .. 100 (step size 1)
The STEP button cycles among 10 Hz, 100 Hz, 1 kHz, 10 kHz, 100 kHz and 1 MHz.
The VFO button toggles between V and B.
The SPAN button cycles among 1.25 kHz, 2.5 kHz, 5 kHz, 10 kHz, 20 kHz and 24 kHz.
The RIT button toggles between ON and OFF.
The SPLIT button toggles between ON and OFF.
The MODE button cycles among LSB, USB, CW-R and CW.
The RX button toggles between RX and TX.
The REC button toggles between ON and OFF.
The 10m, 12m, 15m, 17m, 20m, 30m, 40m and 80m buttons implement band-stacking cycling among 4 settings for each band.
The top right button quits the program.
The bottom right (-) button minimizes the screen.