This program allows you to schedule and fire salvos for the Blackmagic Videohub SDI video routers. You can do this through the command line or importing the script into another program for use with other forms of automation. Some examples would be cron jobs, custom button boxes, or scripts that could monitor the output and check for black video. The world is you oyster, so have fun with this.
The scripts in this repository require Python3 to run properly. You can download Python3 here.
The bmd_scheduler.py requires the python library schedule to work properly. Install it using pip3 install schedule. There are some examples in the script, but you can see more on how the library works in their documentation.
There are 2 Python scripts in this repository. The most important one is bmd_router_control.py. You can import this script into other python files or even run it from the terminal. Here are some examples:
You can call the script from the terminal using a command like this:
python3 ./bmd_router_control.py -a 192.168.1.30 -d 9 -s 10
The flags designate the following:
-a = the ip address of your video router
-d = the destination you want to patch the source into
-s = the source or input you want to route
In other words, the command above would route source 10 to output 9. Keep in mind that these are the sources as they are labeled on the back of the device. The video routers actually start at 0, not 1. But this is taken into account within the script, so you don't have to do the math.
If you'd rather import the bmd_router_control.py into another script, it's super easy to do. Here's an example:
from bmd_router_control import blackmagic_router_control
router = blackmagic_router_control('192.168.1.30')
router.route_inputs([(1,2), (2,3), (4,6)])
The most important thing to remember is that the route_inputs command requires a list of tuples. It's formatted as (destination, source). So the command above would route input 2 to destination 1, input 3 to destination 2, and input 6 to destination 4. It's a little weird, but it's how you'd do it using the GUI.
If that's not quite your cup of tea, you can instead use the route_single command. All you have to do there is pass through the source and destination as arguments and it'll execute a command for you. There is no salvo support for pre-defined configs, but it is a bit easier for one-off setups. For example:
router.route_single(destination=4, source=3)
If you'd rather not make your own way of queueing up commands, feel free to use the included bmd_scheduler.py. This script is pretty easy to use, just make sure you have the library schedule installed. Here's how it works:
- Define when you want the command to trigger using military time
- Replace the
192.168.1.30on line 12 with the IP address of your router - (optional) define your own sources and destinations for readibility and ease-of-use later
- Create your own functions to call later. There are 2 examples in there now that you can edit for your needs
- Schedule when you want the scripts to run. Again, if you want help on how to use schedule, visit their documentation. Right now, they're scheduled to run the salvo every day at the time you specify.
Please feel free to share any improvements you have! This is a fairly new repository, so recommendations or improvements are always appreciated.
Much of this repository is based on the VideoHub SDK documentation provided by Blackmagic Design. For more information, visit their developer page.