/DRAMSys

DRAMSys4.0 a SystemC TLM-2.0 based DRAM simulator.

Primary LanguageC++

DRAMSys4.0 is a flexible DRAM subsystem design space exploration framework based on SystemC TLM-2.0. It was developed at the Microelectronic Systems Design Research Group and Fraunhofer IESE.

>> Official Website <<

Disclaimer

This is the public read-only mirror of an internal DRAMSys repository. Pull requests will not be merged but the changes might be added internally and published with a future commit. Both repositories are synchronized from time to time.

The user DOES NOT get ANY WARRANTIES when using this tool. This software is released under the BSD 3-Clause License. By using this software, the user implicitly agrees to the licensing terms.

If you decide to use DRAMSys in your research please cite the papers [2] [3]. To cite the TLM methodology of DRAMSys use the paper [1].

Key Features

  • standalone simulator with trace players, gem5-coupled simulator and TLM-AT-compliant library
  • support for DDR3/4, LPDDR4, Wide I/O 1/2, GDDR5/5X/6 and HBM1/2
  • support for DDR5 and LPDDR5 under development (contact Matthias Jung for more information)
  • automatic source code generation for new JEDEC standards [3] [9] from the domain-specific language DRAMml
  • FIFO, FR-FCFS and FR-FCFS with read/write grouping scheduling policies
  • open, closed, open adaptive and closed adaptive page policy [8]
  • all-bank refresh and per-bank refresh with pulled-in and postponed refresh commands
  • staggered power down [5]
  • coupling to DRAMPower [4] and 3D-ICE [8] for power and thermal simulation
  • Trace Analyzer for visual and metric-based result analysis

Architecture and Functionality

A UML diagram of the software architecture is presented below; different component implementations are left out for simplicity. More information about the architecture and functionality can be found in the papers [1] [2] [3] and in the introduction video on Youtube.

UML

Trace Analyzer Consulting and Custom-Tailored Modifications

To provide better analysis capabilities for DRAM subsystem design space exploration than the usual performance-related outputs to the console, DRAMSys offers the Trace Analyzer.

All requests, responses and DRAM commands can be recorded in an SQLite trace database during a simulation and visualized with the tool afterwards. An evaluation of the trace databases can be performed with the powerful Python interface of the Trace Analyzer. Different metrics are described as SQL statements and formulas in Python, which can be customized or extended without recompilation.

The Trace Analyzer's main window is shown below.

If you are interested in the database recording feature and the Trace Analyzer, if you need support on how to setup DRAMSys in a virtual platform of your company, or if you require custom modifications of the simulator please contact Matthias Jung.

Trace Analyzer Main Window

Basic Setup

Start using DRAMSys by cloning the repository. Use the --recursive flag to initialize all submodules within the repository, namely DRAMPower, SystemC and nlohmann json.

Dependencies

DRAMSys is based on the SystemC library. SystemC is included as a submodule and will be build automatically with the DRAMSys project. If you want to use an external SystemC version, export the environment variables SYSTEMC_HOME (SystemC root directory) and SYSTEMC_TARGET_ARCH (e.g. linux64) and add the path of the library to LD_LIBRARY_PATH.

Building DRAMSys

DRAMSys uses CMake for the build process, the minimum required version is CMake 3.10.

To build the standalone simulator for running memory trace files, create a build folder in the project root directory, then run CMake and make:

$ cd DRAMSys
$ mkdir build
$ cd build
$ cmake ../DRAMSys/
$ make

If you plan to integrate DRAMSys into your own SystemC TLM-2.0 project you can build the DRAMSys library only:

$ cd DRAMSys
$ mkdir build
$ cd build
$ cmake ../DRAMSys/library/
$ make

To build DRAMSys on Windows 10 we recommend to use the Windows Subsystem for Linux (WSL).

Information on how to couple DRAMSys with gem5 can be found here.

Executing DRAMSys

From the build directory use the commands below to execute the DRAMSys standalone.

$ cd simulator
$ ./DRAMSys

The default base config file is ddr3-example.json and located in DRAMSys/library/resources/simulations, the default resource folder for all nested config files is DRAMSys/library/resources.

To run DRAMSys with a specific base config file:

$ ./DRAMSys ../../DRAMSys/library/resources/simulations/ddr3-example.json

To run DRAMSys with a specific base config file and a resource folder somewhere else to the standard:

$ ./DRAMSys ../../DRAMSys/tests/example_ddr3/simulations/ddr3-example.json ../../DRAMSys/tests/example_ddr3/

DRAMSys Configuration

The DRAMSys executable supports one argument which is a JSON file that contains certain arguments and the path of other configuration files for the desired simulation.

The JSON code below shows an example configuration:

{
    "simulation": {
        "simulationid": "ddr3-example",
        "simconfig": "ddr3.json",
        "thermalconfig": "config.json",
        "memspec": "MICRON_1Gb_DDR3-1600_8bit_G.json",
        "addressmapping": "am_ddr3_8x1Gbx8_dimm_p1KB_brc.json",
        "mcconfig":"fifoStrict.json",
        "tracesetup": [
            {
                "clkMhz": 300,
                "name": "ddr3_example.stl"
            },
            {
                "clkMhz": 400,
                "name": "ddr3_example.stl"
            }
        ]	
    }
}

Fields Description:

  • "simulationid": simulation file identifier
  • "simconfig": configuration file for the DRAMSys simulator
  • "thermalconfig": thermal simulation configuration file
  • "memspec": memory device configuration file
  • "addressmapping": address mapping configuration file
  • "mcconfig": memory controller configuration file
  • "tracesetup": The trace setup is only used in standalone mode. In library mode or gem5 mode the trace setup is ignored. Each device should be added as a json object inside the "tracesetup" array.

Each trace setup device configuration consists of two parameters, clkMhz (operation frequency of the trace player) and a trace file name. Most configuration fields reference other JSON files which contain more specialized chunks of the configuration like a memory specification, an address mapping and a memory controller configuration.

Trace Files

A trace file is a prerecorded file containing memory transactions. Each memory transaction has a time stamp that tells the simulator when it shall happen, a transaction type (read or write) and a hexadecimal memory address.

There are two different kinds of trace files. They differ in their timing behavior and are distinguished by their file extension.

STL Traces (.stl)

The time stamp corresponds to the time the request is to be issued and it is given in cycles of the bus master device. Example: The device is an FPGA with a frequency of 200 MHz (clock period of 5 ns). If the time stamp is 10 the request is to be issued when time is 50 ns.

Syntax example:

# Comment lines begin with #
# [clock-cyle]: [write|read] [hex-address] [hex-data (optional)]
31:	read	0x400140
33:	read	0x400160
56:	write	0x7fff8000 0x123456789abcdef...
81:	read	0x400180
Relative STL Traces (.rstl)

The time stamp corresponds to the time the request is to be issued relative to the end of the previous transaction. This results in a simulation in which the trace player is able to react to possible delays due to DRAM bottlenecks.

Syntax example:

# Comment lines begin with #
# [clock-cyle]: [write|read] [hex-address] [hex-data (optional)]
31:	read	0x400140
2:	read	0x400160
23:	write	0x7fff8000 0x123456789abcdef...
25:	read	0x400180
Elastic Traces

More information about elastic traces can be found in the gem5 readme.

Trace Player

A trace player is equivalent to a bus master device (processor, FPGA, etc.). It reads an input trace file and translates each line into a new memory request. By adding a new device element into the trace setup section one can specify a new trace player, its operating frequency and its trace file.

Configuration File Sections

The main configuration file is divided into self-contained sections. Each of these sections refers to sub-configuration files. Below, the sub-configurations are listed and explained.

Simulator Configuration

The content of ddr3.json is presented below as an example.

{
    "simconfig": {
        "SimulationName": "ddr3",
        "Debug": false,
        "DatabaseRecording": true,
        "PowerAnalysis": false,
        "EnableWindowing": false,
        "WindowSize": 1000,
        "ThermalSimulation": false,
        "SimulationProgressBar": true,
        "CheckTLM2Protocol": false,
        "ECCControllerMode": "Disabled",
        "UseMalloc": false,
        "AddressOffset": 0,
        "ErrorChipSeed": 42,
        "ErrorCSVFile": "",
        "StoreMode": "NoStorage"
    }
}
  • SimulationName (string)
    • Give the name of the simulation for distinguishing from other simulations.
  • Debug (boolean)
    • true: enables debug output on console (only supported by a debug build)
    • false: disables debug output
  • DatabaseRecording (boolean)
    • true: enables output database recording for the Trace Analyzer tool
    • false: disables output database recording
  • PowerAnalysis (boolean)
    • true: enables live power analysis with DRAMPower
    • false: disables power analysis
  • EnableWindowing (boolean)
    • true: enables temporal windowing
    • false: disables temporal windowing
  • WindowSize (unsigned int)
    • Size of the window in clock cycles used to evaluate average bandwidth and average power consumption
  • ThermalSimulation (boolean)
    • true: enables thermal simulation (more information)
    • false: static temperature during simulation
  • SimulationProgressBar (boolean)
    • true: enables the simulation progress bar
    • false: disables the simulation progress bar
  • CheckTLM2Protocol (boolean)
    • true: enables the TLM-2.0 Protocol Checking
    • false: disables the TLM-2.0 Protocol Checking
  • ECCControllerMode (string)
    • "Disabled": No ECC controller is used
    • "Hamming": Enables an ECC Controller with classic SECDED implementation using Hamming Code
  • UseMalloc (boolean)
    • false: model storage using mmap() (DEFAULT)
    • true: allocate memory for modeling storage using malloc()
  • AddressOffset (unsigned int)
    • Address offset of the DRAM subsystem (required for the gem5 coupling).
  • ErrorChipSeed (unsigned int)
    • Seed to initialize the random error generator.
  • ErrorCSVFile (string)
    • CSV file with error injection information.
  • StoreMode (string)
    • "NoStorage": no storage
    • "Store": store data without error model
    • "ErrorModel": store data with error model [6]
Thermal Simulation

The thermal simulation configuration can be found here.

Memory Specification

A file with memory specifications. Timings and currents come from data sheets and measurements and usually do not change.
The fields inside "mempowerspec" can be written directly as a double type, "memoryId" and "memoryType" are string, all other fields are unsigned int.

Address Mapping

DRAMSys uses the ConGen [7] format for address mappings. It provides bit-wise granularity. It also provides the possibility to XOR address bits in order to map page misses to different banks and reduce latencies.

Used fields:

  • "XOR": Defines an XOR connection of a "FIRST" and a "SECOND" bit
  • "BYTE_BIT": Address bits that are connected to the byte bits in ascending order
  • "COLUMN_BIT": Address bits that are connected to the column bits in ascending order
  • "ROW_BIT": Address bits that are connected to the row bits in ascending order
  • "BANK_BIT": Address bits that are connected to the bank bits in ascending order
  • "BANKGROUP_BIT": Address bits that are connected to the bank group bits in ascending order
  • "RANK_BIT": Address bits that are connected to the rank bits in ascending order
  • "CHANNEL_BIT": Address bits that are connected to the channel bits in ascending order
{
    "CONGEN": {
        "XOR": [
            {
                "FIRST": 13,
                "SECOND": 16
            }
        ],
        "BYTE_BIT": [0,1,2],
        "COLUMN_BIT": [3,4,5,6,7,8,9,10,11,12],
        "BANK_BIT": [13,14,15],
        "ROW_BIT": [16,17,18,19,20,21,22,23,24,25,26,27,28,29]
    }	
}
Memory Controller

An example follows.

{
    "mcconfig": {
        "PagePolicy": "Open", 
        "Scheduler": "Fifo", 
        "RequestBufferSize": 8, 
        "CmdMux": "Oldest", 
        "RespQueue": "Fifo", 
        "RefreshPolicy": "Rankwise", 
        "RefreshMaxPostponed": 8, 
        "RefreshMaxPulledin": 8, 
        "PowerDownPolicy": "NoPowerDown", 
        "PowerDownTimeout": 100
    }
}
  • PagePolicy (string)
    • "Open"
    • "OpenAdaptive"
    • "Closed"
    • "ClosedAdaptive"
  • Scheduler (string)
    • "Fifo": first in, first out
    • "FrFcfs": first-ready - first-come, first-served
    • "FrFcfsGrp": first-ready - first-come, first-served with grouping of read and write requests
  • RequestBufferSize (unsigned int)
    • buffer size of the scheduler
  • CmdMux (string)
    • "Oldest": oldest payload has the highest priority
    • "Strict": read and write commands are issued in the same order as their corresponding requests arrived at the channel controller (can only be combined with "Fifo" scheduler)
  • RespQueue (string)
    • "Strict": outgoing responses are not reordered
    • "Reorder": outgoing responses are reordered
  • RefreshPolicy (string)
    • "NoRefresh": refresh disabled
    • "Rankwise": all-bank refresh commands, issued per rank
    • "Bankwise": per-bank refresh commands (only supported by LPDDR4, Wide I/O 2, GDDR5/5X/6, HBM2)
  • RefreshMaxPostponed
    • maximum number of refresh commands that can be postponed (usually 8, with per-bank refresh the number is automatically multiplied by the number of banks)
  • RefreshMaxPulledin
    • maximum number of refresh commands that can be pulled in (usually 8, with per-bank refresh the number is automatically multiplied by the number of banks)
  • PowerDownPolicy (string)
    • "NoPowerDown": power down disabled
    • "Staggered": staggered power down policy [5]
  • PowerDownTimeout (unsigned int)
    • currently unused

DRAMSys with Thermal Simulation

The thermal simulation is performed by a 3D-ICE [8] server accessed through the network. Therefore users interested in thermal simulation during their DRAMSys simulations need to make sure they have a 3D-ICE server up and running before starting. For more information about 3D-ICE visit the official website. An example video that visualizes the results of a thermal simulation is provided on Youtube.

Installing 3D-ICE

Install SuperLU dependencies:

$ sudo apt-get install build-essential git bison flex libblas-dev

Download and install SuperLU:

$ wget http://crd.lbl.gov/~xiaoye/SuperLU/superlu_4.3.tar.gz
$ tar xvfz superlu_4.3.tar.gz
$ cd SuperLU_4.3/
$ cp MAKE_INC/make.linux make.inc

Make sure the SuperLUroot variable in make.inc is properly set. For example, if you downloaded it to your home folder set as follows:

SuperLUroot = $(HOME)/SuperLU_4.3

Compile the library:

$ make superlulib

Download and install bison-2.4.1:

$ wget http://ftp.gnu.org/gnu/bison/bison-2.4.1.tar.gz
$ tar xvzf bison-2.4.1.tar.gz
$ cd bison-2.4.1
$ ./configure --program-suffix=-2.4.1
$ make
$ sudo make install

Download the lastest version of 3D-ICE. Make sure you got version 2.2.6 or greater.

Unzip the archive and go to the 3D-ICE directory:

$ unzip 3d-ice-latest.zip
$ cd 3d-ice-latest/3d-ice-2.2.6

Open the makefile.def and set the following variables properly, e.g.:

SLU_MAIN = $(HOME)/SuperLU_$(SLU_VERSION)
YACC = bison-2.4.1

SYSTEMC_VERSION = 2.3.4
SYSTEMC_ARCH    = linux64
SYSTEMC_MAIN    = $(HOME)/systemc-$(SYSTEMC_VERSION)
SYSTEMC_INCLUDE = $(SYSTEMC_MAIN)/include
SYSTEMC_LIB     = $(SYSTEMC_MAIN)/lib-$(SYSTEMC_ARCH)

In case you are using the SystemC submodule and DRAMSys is located in your home directory the variables should be set as follows:

SYSTEMC_INCLUDE = $(HOME)/DRAMSys/DRAMSys/library/src/common/third_party/systemc/src
SYSTEMC_LIB     = $(HOME)/DRAMSys/build/library/src/common/third_party/systemc/src

Compile 3D-ICE with SystemC TLM-2.0 support:

$ make SYSTEMC_WRAPPER=y

Export the environment variable LIBTHREED_ICE_HOME:

$ export LIBTHREED_ICE_HOME=${HOME}/3d-ice-latest/3d-ice-2.2.6

Running DRAMSys with Thermal Simulation

In order to run DRAMSys with thermal simulation you have to rerun CMake and rebuild the project. The example input trace file can be generated with a Perl script:

$ cd DRAMSys/DRAMSys/library/resources/traces
$ ./generateErrorTest.pl > test_error.stl

Before starting DRAMSys it is necessary to run the 3D-ICE server passing to it two arguments: a suitable configuration file and a socket port number. And then wait until the server is ready to receive requests.

$ cd DRAMSys/DRAMSys/library/resources/configs/thermalsim
$ ~/3d-ice-latest/3d-ice-2.2.6/bin/3D-ICE-Server stack.stk 11880
Preparing stk data ... done !
Preparing thermal data ... done !
Creating socket ... done !
Waiting for client ...

In another terminal or terminal tab start DRAMSys with the special thermal simulation config:

$ cd DRAMSys/build/simulator/
$ ./DRAMSys ../../DRAMSys/library/resources/simulations/wideio-thermal.json

Thermal Simulation Configuration

The content of config.json is presented below as an example.

{
    "thermalsimconfig": {
        "TemperatureScale": "Celsius",
        "StaticTemperatureDefaultValue": 89,
        "ThermalSimPeriod": 100,
        "ThermalSimUnit": "us",
        "PowerInfoFile": "powerInfo.json",
        "IceServerIp": "127.0.0.1",
        "IceServerPort": 11880,
        "SimPeriodAdjustFactor": 10,
        "NPowStableCyclesToIncreasePeriod": 5,
        "GenerateTemperatureMap": true,
        "GeneratePowerMap": true
    }
}
  • TemperatureScale (string)
    • "Celsius"
    • "Fahrenheit"
    • "Kelvin"
  • StaticTemperatureDefaultValue (int)
    • Temperature value for simulations with static temperature
  • ThermalSimPeriod (double)
    • Period of the thermal simulation
  • ThermalSimUnit (string)
    • "s": seconds
    • "ms": millisecond
    • "us": microseconds
    • "ns": nanoseconds
    • "ps": picoseconds
    • "fs": femtoseconds
  • PowerInfoFile (string)
    • File containing power related information: devices identifiers, initial power values and power thresholds.
  • IceServerIp (string)
    • 3D-ICE server IP address
  • IceServerPort (unsigned int)
    • 3D-ICE server port
  • SimPeriodAdjustFactor (unsigned int)
    • When substantial changes in power occur (i.e., changes that exceed the thresholds), then the simulation period will be divided by this number causing the thermal simulation to be executed more often.
  • NPowStableCyclesToIncreasePeriod (unsigned int)
    • Wait this number of thermal simulation cycles with power stability (i.e., changes that do not exceed the thresholds) to start increasing the simulation period back to its configured value.
  • GenerateTemperatureMap (boolean)
    • true: generate temperature map files during thermal simulation
    • false: do not generate temperature map files during thermal simulation
  • GeneratePowerMap (boolean)
    • true: generate power map files during thermal simulation
    • false: do not generate power map files during thermal simulation

Acknowledgements

The development of DRAMSys was supported by the German Research Foundation (DFG) as part of the priority program Dependable Embedded Systems SPP1500 and the DFG grant no. WE2442/10-1. Furthermore, it was supported within the Fraunhofer and DFG cooperation program (grant no. WE2442/14-1) and by the Fraunhofer High Performance Center for Simulation- and Software-Based Innovation. Special thanks go to all listed contributors for their work and commitment during seven years of development.

Shama Bhosale
Luiza Correa
Peter Ehses
Johannes Feldmann
Robert Gernhardt
Doris Gulai
Matthias Jung
Frederik Lauer
Ana Mativi
Felipe S. Prado
Tran Anh Quoc
Janik Schlemminger
Lukas Steiner
Thanh C. Tran
Norbert Wehn
Christian Weis
Éder F. Zulian

References

[1] TLM Modelling of 3D Stacked Wide I/O DRAM Subsystems, A Virtual Platform for Memory Controller Design Space Exploration
M. Jung, C. Weis, N. Wehn, K. Chandrasekar. International Conference on High-Performance and Embedded Architectures and Compilers 2013 (HiPEAC), Workshop on: Rapid Simulation and Performance Evaluation: Methods and Tools (RAPIDO), January, 2013, Berlin.

[2] DRAMSys: A flexible DRAM Subsystem Design Space Exploration Framework
M. Jung, C. Weis, N. Wehn. IPSJ Transactions on System LSI Design Methodology (T-SLDM), October, 2015.

[3] DRAMSys4.0: A Fast and Cycle-Accurate SystemC/TLM-Based DRAM Simulator
L. Steiner, M. Jung, F. S. Prado, K. Bykov, N. Wehn. International Conference on Embedded Computer Systems: Architectures, Modeling, and Simulation (SAMOS), July, 2020, Samos Island, Greece.

[4] DRAMPower: Open-source DRAM Power & Energy Estimation Tool
K. Chandrasekar, C. Weis, Y. Li, S. Goossens, M. Jung, O. Naji, B. Akesson, N. Wehn, K. Goossens. URL: http://www.drampower.info

[5] Optimized Active and Power-Down Mode Refresh Control in 3D-DRAMs
M. Jung, M. Sadri, C. Weis, N. Wehn, L. Benini. VLSI-SoC, October, 2014, Playa del Carmen, Mexico.

[6] Retention Time Measurements and Modelling of Bit Error Rates of WIDE-I/O DRAM in MPSoCs
C. Weis, M. Jung, P. Ehses, C. Santos, P. Vivet, S. Goossens, M. Koedam, N. Wehn. IEEE Conference Design, Automation and Test in Europe (DATE), March, 2015, Grenoble, France.

[7] ConGen: An Application Specific DRAM Memory Controller Generator
M. Jung, I. Heinrich, M. Natale, D. M. Mathew, C. Weis, S. Krumke, N. Wehn. International Symposium on Memory Systems (MEMSYS 2016), October, 2016, Washington, DC, USA.

[8] Simulating DRAM controllers for future system architecture exploration
A. Hansson, N. Agarwal, A. Kolli, T. Wenisch, A. N. Udipi. IEEE International Symposium on Performance Analysis of Systems and Software (ISPASS), 2014, Monterey, USA.

[9] Fast Validation of DRAM Protocols with Timed Petri Nets
M. Jung, K. Kraft, T. Soliman, C. Sudarshan, C. Weis, N. Wehn. ACM International Symposium on Memory Systems (MEMSYS 2019), October, 2019, Washington, DC, USA.