/theorie-check50

Primary LanguagePython

Check50 for Heuristics

Author: Okke van Eck
GitHub: Link to the original repo
Check50 Docs: https://cs50.readthedocs.io/check50/
Note: All test.py files are gitignored!
This repository has the check50 checks for the heuristics (or programmeertheorie) cases, as well as an overview of the necessary changes that needed to be made to the original version of the course.

Setup check environment.

You must have python3 installed and a possibility for creating a virtual environment. The example below uses the python3-venv package, but you can use your own as well.

Install python packages.

sudo apt-get install python3 python3-venv

Create virtual environment and activate it.
python3 -m venv venv
source venv/bin/activate
Install requirements.

pip install -r requirements.txt

Run checks.

It is possible to run the check50 tests via the online version on GitHub, or locally in a development environment. The different options are separated in sections. For all checks, you must be in the folder of the check itself. So cd into the directory of the case you want to test. Let's denote the folder name of the case as <case>.

Run on the check50 servers.

You can run the checks on GitHub on the check50-servers by running the command:
check50 OkkeVanEck/check50_heuristieken/master/<case>

Run locally

You can run the checks on GitHub locally by running the same command with the --local flag specified:
check50 --local OkkeVanEck/check50_heuristieken/master/<case>

Run local code

You can run your local version of a check by running check50 with the --dev flag in the folder where the .check50.yaml is located:
check50 --dev .

Required case changes

There are some changes required for the cases. The changes are de described below, divided by case. For each case it will be necessary to write an explanation on how to use the check50.

Protein Powder
  • Remove spaces behind comma's in example_output.csv
  • Add a footer to output.csv with the score: score,<integer>
AmstelHaege
  • Remove spaces behind comma's in example_output.csv
  • Ask for all four corners in order instead of two
    • Rename header to structure,corner_1,corner_2,corner_3,corner_4,type
  • Also give four corners in the neighbouthood files
  • Add a footer to output.csv with the networth: networth,<integer>
  • Change the project info to only except a map dimension of 180x160 where 180 is the width.
  • Change the given neighbourhood files and example_output.csv to have the 180x160 dimension instead of 160x180.
RailNL
  • Edit Noord-Holland in part one into Noord- en Zuid-Holland
  • Change ConnectiesHolland.csv distances into floats
  • Make the following changes to example_output.csv:
    • Remove spaces behind comma's
    • Change header to train,stations,problem
    • Add footer with score,<integer>,<problem> where problem is either NL or NZH, representing the corresponding problem
    • Change Amsterdam Amster into Amsterdam Sloterdijk
    • Change Goude into Gouda
  • Change filenames to English in every file
  • Create StationsHolland.csv file in the same way as StatinosNational.csv
  • Add header station,x,y to StationsNational.csv and StationsHolland.csv
  • Add header station1,station2,distance to ConnectionsHolland.csv and ConnectionsNational.csv
  • Make ints from the floats in ConnectionsNational.csv or vice versa in ConnectionsHolland.csv
Rush Hour
  • Remove spaces behind comma's in example_output.csv and in board csv files
  • Fix 12x12 board by removing the V-car, since it overlaps the B-car
  • Define under the Output section that the last move must be the red car moving to the border.
  • Add something about the boards being 1-indexed instead of 0-indexed.
Radio Russia
  • Add the created input files.
  • Add information about the different file extensions (.shp and .shx are used for visualisations)
  • Add information about the neighbours.csv files.
  • Make example_output.csv and add a section about it
SmartGrid
  • Remove .txt files from data.
  • Remove spaces and brackets from data files and rename everything to English.
  • Turn example_output.json into English.
  • Add header object to example_output.json with district and costs.
  • Remove parentheses from coordinates in example_output.json.
  • Add explanation that cables have to be placed on top of the house and battery.
  • Add info about cost specifier, i.e. use cost-own or cost-shared in output.csv.
  • Maybe add more info how the .json is structured in problem.
Chips & Circuits
  • Rename pritn.csv for chip_1 to print.csv.
  • Rewrite output alinea to be more precise about copying the example_output.csv and not the other two example files.
  • Remove spaces from all .csv files.
  • Add footer row with the chip number, net number and the length to the example_output.csv
  • Add info about how to use the footer in case.
  • Add info about the optional 3rd axis for coordinates.
  • Fix wrong wires and wrong letters in the example data.