XrayR-V2Board: A Shell repository from missuo

Speed up your nodes with Amazon CDN (CloudFront)

Description

Thanks to XrayR all authors for their contributions
Thanks to XrayR-release for the one-click script
This script is based on XrayR-release.
Only For V2Board.
Support for any protocol.
This repository uses the latest version of XrayR by default

Update

Nov 13, 2022

Support for TLS, such as TCP-TLS, WebSocket-TLS, gRPC-TLS and Trojan-TLS.
If you are using the TLS protocol, use the following command to request a certificate. (Before applying, make sure that the domain name has resolved to an IP and that port 80 of the server is not occupied, and temporarily stop the Nginx service.)

bash <(curl -Ls https://cdn.jsdelivr.net/gh/missuo/AutoApplyCert/apply.sh)

May 19, 2022

Remove the autonomy to choose whether to enable AEAD encryption and force AEAD to be enabled

April 27, 2022

Author delete library, this script enable backup solution, not affected
My XrayR backup

April 13, 2022

Added ARM64 support (e.g. Oracle ARM can be installed perfectly)

February 28, 2022

Modified AEAD encryption default selection (on by default if not entered)

February 2, 2022

Option to turn off AEAD encryption (on by default in official script, off by default in this script)

December 15, 2021

Optionally V2ray, Shadowsocks, Trojan (official script default V2ray, this script default V2ray)

Original project

XrayR-project/XrayR

XrayR-project/XrayR-release

Features

No need to configure panel URL and TOKEN each time (permanent once)
No need to change the node ID in the configuration file

Guide

Fork this repository and modify the config.yml file, only the following two lines need to be modified.

ApiHost: "YOUR_PANEL_URL" # Modify here
ApiKey: "YOUR_TOKEN" # Modify here

Modify line 224 of the install.sh file to change the username missuo to your own GitHub username.

wget https://cdn.jsdelivr.net/gh/missuo/XrayR-V2Board/config.yml -O /etc/XrayR/config.yml

Change the username missuo in the link below to your own GitHub username to complete the configuration of the one-click install script command.

Install Command

bash <(curl -Ls https://cdn.jsdelivr.net/gh/missuo/XrayR-V2Board/install.sh)

Complete the basic node information on the V2Board panel.
Record your node ID.
Execute the above one-click install command on your VPS, it will install fully automatically and you will be prompted to enter your node ID.

Since your repository may be public after you Fork this repository. Modifying the configuration file directly may expose your panel's key information. We recommend downloading config.yml and uploading it to your own server after modifying the information. And fill in the install.sh with your own config file download link. Finally, upload install.sh to your own server to generate your own one-click installation command.

missuo/XrayR-V2Board