protect the SD card from corruption by mounting the rootfs as RO with an overlayfs.
partition the sd card to create a scratch pad writable area to persist pickled data + node configuration files.
create a modest 64M tmpfs mount point that we target by default for pickles with a monitor services that keeps an eye on the disk utiliazation of said tmpfs and chunks it out to non-volitle disk (pikcle partition) as it fills. we need to modify the amya-node daemons to target the tmpfs and /pickle partion for writing/draining.
This script is used to convert a Raspberry Pi Raspbian based filesystem to use overlayFS based on the work from:
https://yagrebu.net/unix/rpi-overlay.md
I've put together a simple script that does the steps mentioned in that description such that you can just clone this repo on your Pi
and do sudo overlayfs.sh
When you reboot, you'll find that /boot is now mounted read-only and the overlay filesystem is mounted on /
mount
...
overlay on / type overlay (rw,noatime,lowerdir=/lower,upperdir=/upper/data,workdir=/upper/work)
...
/dev/mmcblkp1 on /boot type vfat (to,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro)
You can see from the file 'overlay' (which is used to create the overlay before the root filesystem is mounted, which is why we need to create and use an initramfs.) that we mount the root filing system read only on /lower and a tmpfs as /upper/data and /upper/work.
To control the overlayfs then type
overctl
Usage: overctl [-h|-r|-s|-t|-w]
-h, --help This message
-r, --ro Set read-only root with overlay fs
-s, --status Show current state
-t, --toggle Toggle between -r and -w
-w, --rw Set read-write root
So you can use -r and -w to switch back to read-write mode, update the filesystem and then switch to read only mode again (for updates)