mjmeli/arduino-ad5933

Issues

• Has anyone implemented a phase measurement yet?

  #26 opened 2 years ago by miemiemie666
  4

• Arduino Due Compatability

  #28 opened a year ago by bscoventry
  0

• Power Standby failed

  #27 opened a year ago by chloejacobson27
  0

• Can not find Math.h

  #13 opened 5 years ago by peterjcwu
  0

• Connecting external clock

  #25 opened 2 years ago by dunlikecoding2
  0

• Excitation Voltage Output

  #20 opened 3 years ago by Anupriya12-07
  9

• "getComplexData" needs a time-out safety

  #15 opened 4 years ago by eawag-squid
  1

• start of the frequency the impedance value drops

  #22 opened 3 years ago by zifaum
  1

• impedance measurement is not accurate

  #21 opened 3 years ago by zifaum
  2

• The sweep frequency is not correct

  #8 opened 7 years ago by AphroditeJoker
  2

• Calibrate function Problem

  #19 opened 4 years ago by stefi5194
  0

• SWEEP_DELAY

  #14 opened 5 years ago by phanluan1101
  0

• cant run the code

  #12 opened 5 years ago by kespec
  0

• FAILED initialization

  #5 opened 6 years ago by debjyotiC
  4

• Any chance of an open-source license?

  #6 opened 7 years ago by WolvesOfTheNight
  2

• AD5933 to measure change in impedance

  #4 opened 7 years ago by AdarshGouda
  1

• How to connect ad5933 with arduino

  #3 opened 7 years ago by J-SJ
  1

• TODO: excitation voltage range, settling time cycles

  #1 opened 8 years ago by mjmeli
  4

• Possible to program entire control register in one go?

  #2 opened 7 years ago by andrewbourhis
  2