A Raspberry Pi 2 media center enclosure
There are build photos in the images folder, but see the assembly guide on instructables at the following URL for a complete writeup:
http://www.instructables.com/id/Building-a-PiCentr-Home-Media-Center/
Left and right sides (laser cut from 3mm stock): piCentr-sides.svg / piCentr-sides.dxf
Front and back sides (laser cut from 3mm stock): picentr-frontback.svg / picentr-frontback.dxf
Top and bottom sides (laser cut from 6mm stock): piCentr-top-bottom.svg / piCentr-top-bottom.dxf
The Sketchup CAD model of the internal parts: piCentr.skp
The STL of the internal chassis: piCentr-main.stl
The STL of the panel mount adapter if you are using the Western Digital pidrive cable: wd-pidrive-power-panelmount.stl
The STL of the panel mount adapter if you are using a Sabrant SATA to USB adapter or similar: molex-power-panelmount.stl