mlcommons/power-dev

Issues

• Recent changes add whitespace line at the end of spl.txt files

  #326 opened 8 months ago by psyhtest
  1

• Allow fixed range setting for high power devices, optionally remove ranging mode

  #296 opened 10 months ago by arjunsuresh
  16

• Proposal to reduce the ranging mode duration

  #315 opened 10 months ago by arjunsuresh
  1

• Time difference for 4 phases of run more than 500ms

  #320 opened 10 months ago by arjunsuresh
  4

• Please add requirements.txt file

  #318 opened a year ago by rakshithvasudev
  2

• Unable to pass the compliance because of 200ms delta constraint

  #262 opened 2 years ago by rakshithvasudev
  10

• ptd is asked to stop measurement twice

  #287 opened 2 years ago by psyhtest
  11

• Experimental no-ranging mode does not appear to be working

  #314 opened a year ago by psyhtest
  11

• Request to remove the 5% time duration delta check between the ranging and testing modes

  #301 opened a year ago by arjunsuresh
  2

• Add option for DC measurement

  #305 opened a year ago by dmiskovic-NV
  1

• Uncertainty samples are ignored and submission checker is passing

  #288 opened a year ago by arjunsuresh
  0

• Is this a typo in the checker?

  #289 opened a year ago by arjunsuresh
  0

• Supporting Simultaneous Power Measurements on Multi-channel Devices

  #275 opened a year ago by arjunsuresh
  1

• Average power measured should exclude invalid measurements

  #297 opened a year ago by arjunsuresh
  1

• Request to relax the power checker rules

  #293 opened a year ago by arjunsuresh
  0

• Manually setting the range is broken

  #283 opened a year ago by psyhtest
  3

• PTD 1.10.0 is not supported by the submission checker

  #285 opened 2 years ago by arjunsuresh
  1

• Issues with measuring power of low power devices

  #280 opened 2 years ago by dmiskovic-NV
  3

• Ranging modes options

  #270 opened 2 years ago by psyhtest
  11

• Power Server should fail if PTDaemon connection fails

  #272 opened 2 years ago by arjunsuresh
  0

• Warning regarding unknown options while running on Ubuntu 22.04

  #276 opened 2 years ago by arjunsuresh
  0

• Submission checker: YokogawaWT330 is not supported

  #266 opened 2 years ago by psyhtest
  2

• Option for auto/max ranging

  #260 opened 2 years ago by psyhtest
  1

• High overhead of power measurements for CPU inference measurements

  #236 opened 3 years ago by psyhtest
  11

• Power measurement via ipmitool

  #271 opened 2 years ago by arjunsuresh
  1

• Measuring high-power systems

  #237 opened 3 years ago by psyhtest
  3

• Using v2.0 power repo for v2.1 submission

  #267 opened 2 years ago by anirban-ghosh
  3

• Feature Request: Multi-Analyzer Support

  #263 opened 2 years ago by trevor-cockrell
  1

• Yokogawa WT310E ranging failures at under 0.2 A

  #253 opened 2 years ago by psyhtest
  28

• Yokogawa WT310E Ethernet configuration

  #254 opened 3 years ago by psyhtest
  10

• Checker needs to be checked

  #255 opened 3 years ago by s-idgunji
  3

• Versions being used for v1.1

  #258 opened 3 years ago by s-idgunji
  3

• Unable to pass the checker

  #250 opened 3 years ago by rakshithvasudev
  31

• Could you give us a tutorial about how to use this? Thank you

  #256 opened 3 years ago by Water2style
  4

• WT500 Multichannel Logic Broken

  #248 opened 3 years ago by trevor-cockrell
  3

• IndexError: list index out of range

  #247 opened 3 years ago by rakshithvasudev
  7

• checker fails "Check client server messages"

  #243 opened 3 years ago by trevor-cockrell
  1

• Submission checker : Time difference checker needs to be modified

  #239 opened 3 years ago by s-idgunji
  3

• Output files not logged on server

  #244 opened 3 years ago by manuprasad07
  1

• Force UTC timezone in client and server

  #232 opened 3 years ago by ykurlaev
  5

• Comparisons based on secondary or derived metrics must be explicit

  #241 opened 3 years ago by psyhtest
  3

• Proposal: simplify log gathering/storing

  #227 opened 3 years ago by xzfc
  2

• Submission checker: YokogawaWT310E is not supported

  #238 opened 3 years ago by psyhtest
  4

• Integrate client into loadgen

  #226 opened 4 years ago by xzfc
  1

• Change meter range from auto to max during ranging stage

  #231 opened 3 years ago by ykurlaev
  9

• Yokogawa WT500 Channel Issues

  #220 opened 4 years ago by trevor-cockrell
  1

• Ranging issues

  #219 opened 4 years ago by dmiskovic-NV
  6

• Add Yokogawa WT500 to the list of supported meters in check.py

  #216 opened 4 years ago by ykurlaev
  0

• Workaround for daylight saving time issue

  #210 opened 4 years ago by ykurlaev
  0

• YokogawaWT330_multichannel is not supportable

  #211 opened 4 years ago by nvpohanh
  0