puppet-rsyslog 
Manage rsyslog client and server via Puppet
Donate
If you find this module useful, consider supporting me via Gratipay
or send some bitcoins to 1Na3YFUmdxKxJLiuRXQYJU2kiNqA3KY2j9
REQUIREMENTS
- Puppet >= 3.0
- Starting with release 4.0.0 Puppet < 3.0 is not tested anymore
Supported platforms
- Debian-based distributions
- RedHat-based distributions
- Suse-based distributions
- Gentoo
- FreeBSD
USAGE
Client
Using default values
class { 'rsyslog::client': }
Variables and default values
class { 'rsyslog::client':
log_remote => true,
spool_size => '1g',
spool_timeoutenqueue => false,
remote_type => 'tcp',
remote_forward_format => 'RSYSLOG_ForwardFormat',
log_local => false,
disable_xconsole => false,
log_local_custom => undef,
log_auth_local => false,
listen_localhost => false,
split_config => false,
custom_config => undef,
custom_params => undef,
server => 'log',
port => '514',
remote_servers => false,
ssl => false,
ssl_ca => undef,
ssl_permitted_peer => undef,
ssl_auth_mode => 'anon',
log_templates => false,
log_filters => false,
actionfiletemplate_cust => false,
actionfiletemplate => false,
high_precision_timestamps => false,
rate_limit_burst => undef,
rate_limit_interval => undef,
imfiles => undef
}
imfile entries
Gathers log information from a file
rsyslog::imfile { 'my-imfile':
file_name => '/some/file',
file_tag => 'mytag',
file_facility => 'myfacility',
}
rsyslog.d conf files
e.g. rsyslog.d/10-puppetagent.conf - moves puppet-agent entries to a file and excludes from /var/log/messages
rsyslog::snippet { '10-puppetagent':
content => ":programname,contains,\"puppet-agent\" /var/log/puppetlabs/puppet/puppet-agent.log\n& ~",
}
Defining custom logging templates
The log_templates parameter can be used to set up custom logging templates, which can be used for local and/or remote logging. More detail on template formats can be found in the rsyslog documentation.
The following examples sets up a custom logging template as per RFC3164fmt:
class{'rsyslog::client':
log_templates => [
{
name => 'RFC3164fmt',
template => '<%PRI%>%TIMESTAMP% %HOSTNAME% %syslogtag%%msg%',
},
]
}Logging to multiple remote servers
The remote_servers parameter can be used to set up logging to multiple remote servers which are supplied as a list of key value pairs for each remote. There is an example configuration provided in ./test/multiple_hosts.pp
Using the remote_servers parameter over-rides the other remote sever parameters, and they will not be used in the client configuration file:
log_remoteremote_typeserverport
The following example sets up three remote logging hosts for the client:
class{'rsyslog::client':
remote_servers => [
{
host => 'logs.example.org',
},
{
port => '55514',
},
{
host => 'logs.somewhere.com',
port => '555',
pattern => '*.log',
protocol => 'tcp',
format => 'RFC3164fmt',
},
]
}Each host has the following parameters:
- host: Sets the address or hostname of the remote logging server. Defaults to
localhost - port: Sets the port the host is listening on. Defaults to
514 - pattern: Sets the pattern to match logs. Defaults to
*.* - protocol: Sets the protocol. Only recognises TCP and UDP. Defaults to UDP
- format: Sets the log format. Defaults to not specifying log format, which defaults to the format set by
ActionFileDefaultTemplatein the client configuration.
Logging to a MySQL or PostgreSQL database
Events can also be logged to a MySQL or PostgreSQL database. The database needs to be deployed separately, either locally or remotely. Schema are available from the rsyslog source:
Declare the following to configure the connection:
class { 'rsyslog::database':
backend => 'mysql',
server => 'localhost',
database => 'Syslog',
username => 'rsyslog',
password => 'secret',
}
Server
Using default values
class { 'rsyslog::server': }
Log filter example (for Hiera)
rsyslog::client::log_filters:
- expression: '$programname == "foo"'
action: /var/log/foo.log
Variables and default values
class { 'rsyslog::server':
enable_tcp => true,
enable_udp => true,
enable_relp => true,
remote_ruleset_tcp => true,
remote_ruleset_udp => true,
remote_ruleset_relp => true,
enable_onefile => false,
relay_server => false,
server_dir => '/srv/log/',
custom_config => undef,
content => undef,
port => '514',
relp_port => '20514',
address => '*',
high_precision_timestamps => false,
ssl => false,
ssl_ca => undef,
ssl_cert => undef,
ssl_key => undef,
ssl_permitted_peer => undef,
ssl_auth_mode => 'anon',
log_templates => false,
log_filters => false,
actionfiletemplate_cust => false,
actionfiletemplate => false,
rotate => undef
}
Both can be installed at the same time.
PARAMETERS
The following lists all the class parameters this module accepts.
RSYSLOG CLASS PARAMETERS VALUES DESCRIPTION
-------------------------------------------------------------------
msg_reduction true,false Reduce repeated messages. Defaults to false.
non_kernel_facility true,false Permit non-kernel facility messages in the kernel log. Defaults to false.
omit_local_logging true,false Turn off message reception via local log socket. Defaults to true only for RedHat 7+ and false elsewhere.
preserve_fqdn true,false Use full name of host even if sender and receiver are in the same domain. Defaults to false.
local_host_name STRING Use a custom local host name, instead of clients actual host name. Defaults to undef.
package_status STRING Manages rsyslog package installation. Defaults to 'present'.
RSYSLOG::SERVER CLASS PARAMETERS VALUES DESCRIPTION
-------------------------------------------------------------------
enable_tcp true,false Enable TCP listener. Defaults to true.
enable_udp true,false Enable UDP listener. Defaults to true.
enable_relp true,false Enable RELP listener. Defaults to true (v6.3.6+).
remote_ruleset_tcp true,false Disables the remote ruleset when the TCP listener is enabled.
remote_ruleset_udp true,false Disables the remote ruleset when the UDP listener is enabled.
remote_ruleset_relp true,false Disables the remote ruleset when the RELP listener is enabled.
enable_onefile true,false Only one logfile per remote host. Defaults to false.
relay_server true,false If the server should be able to relay the received logs to another server. The rsyslog::client must also be set up. Defaults to false.
server_dir STRING Folder where logs will be stored on the server. Defaults to '/srv/log/'
custom_config STRING Specify your own template to use for server config. Defaults to undef. Example usage: custom_config => 'rsyslog/my_config.erb'
content STRING Specify the content of the server config, instead of using a template. Defaults to undef.
port STRING/INTEGER Port to listen on for messages via UDP and TCP. Defaults to 514
relp_port STRING/INTEGER Port to listen on for messages via RELP. Defaults to 20514
address STRING The IP address to bind to. Applies to UDP listener only. Defaults to '*'.
high_precision_timestamps true,false Whether or not to use high precision timestamps. Defaults to false.
ssl true,false Enable SSL support. Defaults to false.
ssl_ca STRING Path to SSL CA certificate. Defaults to undef.
ssl_cert STRING Path to SSL certificate. Defaults to undef.
ssl_key STRING Path to SSL private key. Defaults to undef.
ssl_permitted_peer STRING List of permitted peers. Defaults to undef.
ssl_auth_mode STRING SSL auth mode. Defaults to anon.
log_templates HASH Provides a hash defining custom logging templates using the `$template` configuration parameter. Defaults to false.
log_filters HASH Provides a hash defining custom logging filters using the `if/then` configurations parameter. Defaults to false.
actionfiletemplate_cust STRING If set this defines the `ActionFileDefaultTemplate custom formatting` which sets customisations over the default log format for remote and local logging. Must be used with actionfiletemplate to take effect. Defaults to false.
actionfiletemplate STRING If set this defines the `ActionFileDefaultTemplate` which sets the default logging format for remote and local logging. Defaults to false.
rotate STRING Enables rotation of logfiles. Valid values: year, month, day. Defaults to undef.
RSYSLOG::CLIENT CLASS PARAMETERS VALUES DESCRIPTION
-------------------------------------------------------------------
log_remote true,false Log Remotely. Defaults to true.
spool_size STRING Max size for disk queue if remote server failed. Defaults to '1g'.
remote_type 'tcp','udp','relp' Which protocol to use when logging remotely. Defaults to 'tcp'.
remote_forward_format STRING Which forward format for remote servers should be used. Only used if remote_servers is false.
log_local true,false Log locally. Defaults to false.
log_auth_local true,false Just log auth facility locally. Defaults to false.
split_config true,false Splits the client config into 00_client_config.conf, 50_client_remote.conf and 99_client_local.conf. Defaults to false.
custom_config STRING Specify your own template to use for client config. Defaults to undef. Example usage: custom_config => 'rsyslog/my_config.erb'
custom_params TODO TODO
server STRING Rsyslog server to log to. Will be used in the client configuration file. Only used, if remote_servers is false.
port '514' Remote server port. Only used if remote_servers is false.
remote_servers Array of hashes Array of hashes with remote servers. See documentation above. Defaults to false.
ssl true,false Enable SSL support. Defaults to false.
ssl_ca STRING SSL CA file location. Defaults to undef.
ssl_cert STRING Path to SSL certificate. Defaults to undef.
ssl_key STRING Path to SSL private key. Defaults to undef.
ssl_permitted_peer STRING List of permitted peers. Defaults to undef.
ssl_auth_mode STRING SSL auth mode. Defaults to anon.
log_templates HASH Provides a hash defining custom logging templates using the `$template` configuration parameter.
log_filters HASH Provides a hash defining custom logging filters using the `if/then` configurations parameter.
actionfiletemplate_cust STRING If set this defines the `ActionFileDefaultTemplate custom formatting` which sets customisations over the default log format for remote and local logging. Must be used with actionfiletemplate to take effect. Defaults to false.
actionfiletemplate STRING If set this defines the `ActionFileDefaultTemplate` which sets the default logging format for remote and local logging.
high_precision_timestamps true,false Whether or not to use high precision timestamps.
RSYSLOG::DATABASE CLASS PARAMETERS VALUES DESCRIPTION
-------------------------------------------------------------------
backend 'mysql','pgsql' Database backend (MySQL or PostgreSQL).
server STRING Database server.
database STRING Database name.
username STRING Database username.
password STRING Database password.
Other notes
By default, rsyslog::server will strip numbers from hostnames. This means the logs of multiple servers with the same non-numerical name will be aggregrated in a single directory. i.e. www01 www02 and www02 would all log to the www directory.
To log each host to a seperate directory, set the custom_config parameter to 'rsyslog/server-hostname.conf.erb'
If any of the following parameters are set to false, then the module will not
manage the respective package:
gnutls_package_name
relp_package_name
rsyslog_package_name
This can be used when using the adiscon PPA repository, that has merged rsyslog-gnutls with the main rsyslog package.
Default package_status parameter for rsyslog class used to be 'latest'. However, it was against puppet best practices so it defaults to 'present' now.