TF530
** WARNING THIS IS BETA AT THE MOMENT
This repository contains all the files needed to produce a copy of my accelerator board.
The CPLD Required is a XC9572XL-10VQ64
Everything in this repository is released under the GNU GPLv2. You may create or base commercial PCBs from the work in this repository but you must make the sources for all derivative work available.
Firmware / Requirements
- Xilinx ISE, 14.7 (the final version - other versions may work but this is the one I support)
- JTAG Adaptor
For more information visit my channel
##License
This project and all the files contained are released under the GNU GPLv2. If you build a modified version of the board you must supply the end user with all the sources (this can be a web link).
##The TerribleFire 530 board (Revision 2)
This board is now in Beta. It may not work in all circumstances but it has been verified to boot AmigaOS 1.3, 2.05 and 3.1 and run various games and desktop apps at 25Mhz. Operation is not guarunteed to be crash free but will work in most "happy path" situations.
I have only verified the HD interface with Compact Flash cards. I have verified this board boots on Amiga 500 Rev 5, 6a, 8.1a
To buy 10 blank copies of the revision 2 board follow the following link.
http://dirtypcbs.com/store/designer/details/12476/1330/tf530-rev2b-zip
(Terrible Fire gets a $2 "cut" for each order... in reality this is a downpayment on future prototype board orders).
I accept no responsibiltiy for any damage to any equipment that results from the use of this board. IT IS ENTIRELY AT YOUR OWN RISK!
Installation
Installation is exactly the same as the Kipper2k A508. Refer to http://www.kipper2k.com/a500fastmem.html
You need to connect the OVR and INT2 signals to the A500 header port.
What does the board look like
The BOM
| Qty | Value | Device | Package | Parts | Description |
|---|---|---|---|---|---|
| 1 | MC68030RC | MPGA128 | IC1 | 68xxx PROCESSOR | |
| 1 | MC68881FN-SOC | PLCC68-S | IC2 | 68xxx PROCESSOR | |
| 1 | 10K | RESISTOR1206 | 1206 | R3 | Resistors |
| 13 | 10uF | CAP_CERAMIC1206 | 1206 | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13 | Ceramic Capacitors |
| 2 | 47K | RESISTOR1206 | 1206 | R1, R2 | Resistors |
| 2 | 74LVC1G17DBV | 74LVC1G17DBV | SOT23-5 | IC4, IC5 | Single Schmitt-Trigger Buffer |
| 1 | A500 | JUMPER-2PTH | 1X02 | A500 | Jumper |
| 4 | AS7C4096A-12TIN | AS7C4096A-12TCN | TSOP44-II | U$1, U$2, U$3, U$4 | |
| 1 | AUXPINS | JUMPER-2PTH | 1X02 | AUXPINS | Jumper |
| 1 | BYPASS | JUMPER-2PTH | 1X02 | BYPASS | Jumper (optional) |
| 3 | CAY16-103J4LF | CAY16-103J4LF | RESCAXE80P320X160-8N | RN1, RN2, RN3 | Res Thick Film Array 10K Ohm |
| 1 | CDIS | JUMPER-2PTH | 1X02 | JP5 | Jumper |
| 1 | CLOCKSEL | JUMPER-3PTH | 1X03 | JP1 | |
| 1 | EXT5V | JUMPER-2PTH | 1X02 | JP7 | Jumper |
| 1 | IDE CONNECTOR | PINHD-2X20 | 2X20 | IDE | PIN HEADER |
| 1 | JTAG | HEADER-1X6ROUND | 1X06_ROUND | JTAG | PIN HEADER |
| 1 | LM1117 | V_REG_LM1117SOT223 | SOT223 | U1 | 3.3V Voltage Regulator LM1117 |
| 1 | MC68000 | MC68000P | DIL64 | X1 | 68xxx PROCESSOR SOCKET |
| 1 | MMUDIS | JUMPER-2PTH | 1X02 | JP3 | Jumper |
| 1 | SPI PORT | PINHD-2X6 | 2X06 | SPIPORT | PIN HEADER |
| 1 | X24MHZ | OSCILLATOR | OSC_7X5MM | OSC1 | 24 Mhz llators |
| 2 | XC9572XL-10TQG100C | XC9572XL-VQ64 | VQ64 | XC9572XL(BUS), XC9572XL(RAM) |