mochman/node-red-contrib-light-transition

Issues

• Problem - Home Assistant takes payload.data.variable instead of payload.variable

  #48 opened a year ago by lgwapnitsky
  2

• Too much steps mess things up with RGB

  #47 opened 2 years ago by Edo78
  10

• Problem - Sometimes it will get stuck on the first step

  #38 opened 3 years ago by Jleagle
  7

• Problem - When i set the transition to exponential it sends NaNs

  #37 opened 3 years ago by Jleagle
  2

• Problem - RGB value components over 255

  #32 opened 3 years ago by vaclavhorejsi
  3

• topic is removed from message?

  #23 opened 3 years ago by Fernando-Checa
  2

• Transition to zero brightness

  #15 opened 3 years ago by pfurrie
  2

• Second and Seconds settings problem

  #13 opened 3 years ago by pfurrie
  4

• RGB value above 255

  #10 opened 3 years ago by mua1105
  3

• payload.brightness

  #9 opened 3 years ago by DanNielsen
  2

• Brightness after stop is not the same as settings.

  #8 opened 3 years ago by LithiumNL
  3

• Brightness integer

  #5 opened 3 years ago by DanNielsen
  5

• Add brightness to output (range 1-255)

  #6 opened 3 years ago by mochman
  3

• Possibility to use brightness (0-255) instead of percentage

  #3 opened 3 years ago by mortenmoulder
  2