ESP8266 MQTT Thermal Printer for HA (V2.1)

This project is fork from ESP8266 MQTT Thermal Printer and a I really would like to thatnk original author for it.

Here I'll try to improve it to the best of my abilities for specific use - adding it to [Home Assistant] as printer for anything that wou want to print from it.

in Version 2 we can:

change the textsize via mqtt
change the textlineheight via mqtt
can change to inverse font via mqtt
can justify the text via mqtt
can change to print bold via mqtt
change to underline the text via mqtt in Version 2.1 we can:
print barcodes via mqtt
receive the paperload status via mqtt

Although COMPLETELY unnecessary, this printer is really fun addtion to it allowing you to expand your system output options and it would be great to have it in future as part of the notification platform. BUT that is out of my (I'l just a sales guy tinkering) programming capabilities.

About printer

This 58mm Thermal Printer can print by using USB/TTL connection. In the package you will receive power cable and data cable. It has preloaded firmware with Latin alphabet (ASCII) but also has capability to print Bar Code (something I still havent test) and 2D Bar code. Yes, if you know how to convert, pritner can also print very simple images.

Paper needs to be 57.5mm (58 is ok) and there are even sticker version, which opens up some more capabilites.

Parts required

thermal printer
ESP8266
some wires - for testing I used dupont cables m/f type
power supply - for testing I used 2A mobile phone charger

Adafruit Thermal Printer library

For printing, we are using Adafruit Thermal Library. At this point, I tried to improve on original code, by adding 2 options in static configuration file.

Text size (options are S, M and L with S being default)
Line spacing (minimum value is 24, default 32 and maximum 64) Values can be changed via topics configured in the config.h

Bitmap printing

Maximum size for bitmap printing is 384 pixels width

Printer has no paper

In Version 2.1 the controller sends in topic mqtt_listen_topic_papercheck every defined seconds (papercheck_milliseconds) a yes or no

Badcode usage

in Version 2.1 Important: your thermal printer has only 58mm to print the barcode in the example below "Hello!!" the CODE93 barcode the max with of the paper has been reached. :-(

v------ use this number to config below
0 = UPC_A, < UPC-A barcode system. 11-12 char
1 = UPC_E, < UPC-E barcode system. 11-12 char
2 = EAN13, < EAN13 (JAN13) barcode system. 12-13 char
3 = EAN8, < EAN8 (JAN8) barcode system. 7-8 char
4 = CODE39, < CODE39 barcode system. 1<=num of chars
5 = ITF, < ITF barcode system. 1<=num of chars, must be an even number
6 = CODABAR, < CODABAR barcode system. 1<=num<=255
7 = CODE93, < CODE93 barcode system. 1<=num<=255
8 = CODE128, < CODE128 barcode system. 2<=num<=255
payload for the barcode_ topic (configed below) is
<barcodetype>|<barcode_value> e.g. 7|Hello!!

Configuration

In order to compile this project, you need to rename example-config.h to config.h and edit values there:

ssid - change to matche your WiFi SSD
password - needs to match your WiFi password
mqtt_server - IP address of your MQTT server
mqtt_user - if you need user credential to access MQTT, input here username, if not leave empty
mqtt_pass - password to access MQTT server, if needed
my_id - name of the printer (will be visible in MQTT log)
mqtt_port - MQTT server port, default is 1883
baud - baud rate for communication, leave at 9600
papercheck_milliseconds - sends every defined milliseconds the status on topic mqtt_listen_topic_papercheck (see below) recommendation: minimum 10000 (= 10sec)
mqtt_listen_topic_text2print - MQTT topic that we will be using ot listen for text to print e.g. Hello world!
mqtt_listen_topic_textsize - MQTT topic for the text size aviable parameters are S = small, M = medium, L = large
mqtt_listen_topic_textlineheight - MQTT topic for the textlineheight default ist set in the config.h, minimum 24 and maximum 64
mqtt_listen_topic_textinverse - MQTT topic for inverse follow the text: 1 = inverse, 0 = not inverse
mqtt_listen_topic_textjustify - MQTT topic for justify follow the text: left = L, center = C, right = R
mqtt_listen_topic_textbold - MQTT topic to bold the follow text: 1 = bold, 0 = not bold
mqtt_listen_topic_textunderline - MQTT topic for inverse the text: 1 = underline, 0 = not underline
mqtt_text_size - MQTT topic for initial size of the text we will print, S for Small, M for Medium, L for Large
mqtt_row_spacing - MQTT topic of initial row spacing with default being 32, minimum 24 and maximum 64
mqtt_listen_topic_barcode - MQTT topic to print barcode in payload should be: <barcodetype>|<barcode_value> e.g. 7|HelloMaster here 4 is barcodetype CODE93
mqtt_listen_topic_papercheck - MQTT topic (readonly!) sends every defined milliseconds papercheck_milliseconds the status of the paperload yes | no

MQTT Topics

mqtt topic*	payload
mqtt_listen_topic_text2print	e.g. "Hello world!"
mqtt_listen_topic_textsize	S = small, M = medium, L = large
mqtt_listen_topic_textlineheight	minimum 24 and maximum 64 e.g. 24
mqtt_listen_topic_textinverse	1 = inverse, 0 = not inverse
mqtt_listen_topic_textjustify	left = L, center = C, right = R
mqtt_listen_topic_textbold	1 = bold, 0 = not bold
mqtt_listen_topic_textunderline	1 = underline, 0 = not underline
mqtt_listen_topic_barcode	<barcodetype>\|<barcode_value> e.g. 7\|HelloMaster
mqtt_listen_topic_papercheck	readonly! - yes - no

*defined in config-file above

Credits

HutchieV for ESP8266 MQTT Thermal Printer

mog/ESP8266-MQTT-Thermal-Printer-for-HA