After Blobifier Nozzle wipe -> Z height goes near 0

Question

After Blobifier Nozzle wipe -> Z height goes near 0

Closed this issue 7 months ago · 3 comments

last HH update (v2.7.0-153-g80e5b7b2):
After Blobifier Nozzle wipe -> z height goes near 0 and the nozzle scratches over the surface, when the nozzle arrives the wipe tower, the z-axis adjust the right height.

I replace the mmu_sequence.cfg with a older one, now its fixed, the z height move to the right height not to 0 after nozzle wiping.

video.mp4

Answer 1 · 2024-09-03T16:28:06.000Z

Fixed. Force an update and this shouldn't happen. It only occurs if you have no parking defined and use a wipe tower.

Answer 2 · 2024-09-03T18:38:53.000Z

Hello moggieuk,

now its working fine.
Thank you for your quick response.

Answer 3 · 2024-09-04T06:42:52.000Z

Cool. Sorry about that. Always a risk with a new release that restructures the code a little...