Thumbsplit58 Hardware
File archive for Thumbsplit58 keyboard PCB and case. You may also want to refer Nordic MCU firmware and qmk_firmware repository.
This repository only contains PCB gerber files for keyboard itself. You can use Comet46's receiver gerber files to make receiver for this keyboard.
Top plates
Top plate DXF files are available under dxf directory. This design is intended to be milled using 2mm endmill, but it should be manufacturable by laser cutters.
| Left | Right | |
|---|---|---|
| rev1 (1u/1.5u support) |  |
 |
| rev2 (1.5u only) |  |
 |
Case
Case STL files are available under stl directory. This design is intended to be 3D printed using SLS (Selective Laser Sintering) or SLA (Stereolithography) printer. It may be printable by FDM (Fused Deposition Modeling) printers, but probably requires additional work.
| Left | Right | |
|---|---|---|
| rev1 (CR2032) |  |
 |
| rev2 (AA) |  |
 |
Gerber files
Gerber files are available under gerber directory. These archives follow Fusion PCB's design guideline and output instruction.
Schematics
Parts list
TODO