Security Disclaimer
Lightwalletd is under active development, some features are more stable than others. The code has not been subjected to a thorough review by an external auditor, and recent code changes have not yet received security review from Electric Coin Company's security team.
Developers should familiarize themselves with the wallet app threat model, since it contains important information about the security and privacy limitations of light wallets that use Lightwalletd.
Overview
lightwalletd is a backend service that provides a bandwidth-efficient interface to the Zcash blockchain. Currently, lightwalletd supports the Sapling protocol version and beyond as its primary concern. The intended purpose of lightwalletd is to support the development and operation of mobile-friendly shielded light wallets.
lightwalletd is a backend service that provides a bandwidth-efficient interface to the Zcash blockchain for mobile and other wallets, such as Zecwallet.
To view status of CI pipeline
To view detailed Codecov report
Documentation for lightwalletd clients (the gRPC interface) is in docs/rtd/index.html
. The current version of this file corresponds to the two .proto
files; if you change these files, please regenerate the documentation by running make doc
, which requires docker to be installed.
Local/Developer docker-compose Usage
Local/Developer Usage
Zcashd
You must start a local instance of zcashd
, and its .zcash/zcash.conf
file must include the following entries
(set the user and password strings accordingly):
txindex=1
insightexplorer=1
experimentalfeatures=1
rpcuser=xxxxx
rpcpassword=xxxxx
The zcashd
can be configured to run mainnet
or testnet
(or regtest
). If you stop zcashd
and restart it on a different network (switch from testnet
to mainnet
, for example), you must also stop and restart lightwalletd.
It's necessary to run zcashd --reindex
one time for these options to take effect. This typically takes several hours, and requires more space in the .zcash
data directory.
Lightwalletd uses the following zcashd
RPCs:
getblockchaininfo
getblock
getrawtransaction
getaddresstxids
sendrawtransaction
Lightwalletd
First, install Go version 1.11 or later. You can see your current version by running go version
.
Clone the current repository into a local directory that is not within any component of
your $GOPATH
($HOME/go
by default), then build the lightwalletd server binary by running make
.
To run SERVER
Assuming you used make
to build the server, here's a typical developer invocation:
./lightwalletd --no-tls-very-insecure --zcash-conf-path ~/.zcash/zcash.conf --data-dir . --log-file /dev/stdout
Type ./lightwalletd help
to see the full list of options and arguments.
Production Usage
Run a local instance of zcashd
(see above), except do not specify --no-tls-very-insecure
.
Ensure Go version 1.11 or later is installed.
x509 Certificates You will need to supply an x509 certificate that connecting clients will have good reason to trust (hint: do not use a self-signed one, our SDK will reject those unless you distribute them to the client out-of-band). We suggest that you be sure to buy a reputable one from a supplier that uses a modern hashing algorithm (NOT md5 or sha1) and that uses Certificate Transparency (OID 1.3.6.1.4.1.11129.2.4.2 will be present in the certificate).
To check a given certificate's (cert.pem) hashing algorithm:
openssl x509 -text -in certificate.crt | grep "Signature Algorithm"
To check if a given certificate (cert.pem) contains a Certificate Transparency OID:
echo "1.3.6.1.4.1.11129.2.4.2 certTransparency Certificate Transparency" > oid.txt
openssl asn1parse -in cert.pem -oid ./oid.txt | grep 'Certificate Transparency'
To use Let's Encrypt to generate a free certificate for your frontend, one method is to:
- Install certbot
- Open port 80 to your host
- Point some forward dns to that host (some.forward.dns.com)
- Run
certbot certonly --standalone --preferred-challenges http -d some.forward.dns.com
- Pass the resulting certificate and key to frontend using the -tls-cert and -tls-key options.
To run production SERVER
Example using server binary built from Makefile:
./lightwalletd --tls-cert cert.pem --tls-key key.pem --zcash-conf-path /home/zcash/.zcash/zcash.conf --log-file /logs/server.log
Block cache
Lightwalletd caches all blocks from Sapling activation up to the most recent block, which takes about an hour the first time you run lightwalletd. During this syncing, lightwalletd is fully available, but block fetches are slower until the download completes.
After syncing, lightwalletd will start almost immediately,
because the blocks are cached in local files (by default, within
/var/lib/lightwalletd/db
; you can specify a different location using
the --data-dir
command-line option).
Lightwalletd checks the consistency of these files at startup and during
operation as these files may be damaged by, for example, an unclean shutdown.
If the server detects corruption, it will automatically re-downloading blocks
from zcashd
from that height, requiring up to an hour again (no manual
intervention is required). But this should occur rarely.
If lightwalletd detects corruption in these cache files, it will log
a message containing the string CORRUPTION
and also indicate the
nature of the corruption.
Darksidewalletd & Testing
Lightwalletd now supports a mode that enables integration testing of itself and wallets that connect to it. See the darksidewalletd docs for more information.
Pull Requests
We welcome pull requests! We like to keep our Go code neatly formatted in a standard way,
which the standard tool gofmt can do. Please consider
adding the following to the file .git/hooks/pre-commit
in your clone:
#!/bin/sh
modified_go_files=$(git diff --cached --name-only -- '*.go')
if test "$modified_go_files"
then
need_formatting=$(gofmt -l $modified_go_files)
if test "$need_formatting"
then
echo files need formatting (then don't forget to git add):
echo gofmt -w $need_formatting
exit 1
fi
fi
You'll also need to make this file executable:
$ chmod +x .git/hooks/pre-commit
Doing this will prevent commits that break the standard formatting. Simply run the
gofmt
command as indicated and rerun the git add
and git commit
commands.