TangNano-1K is the new ting FPGA board of GW1NZ-1 FPGA.
Orignal TangNano is based on GW1N-1 FPGA, refer to: https://github.com/sipeed/Tang-Nano-examples
TangNano-1K have independent 27M oscillator for FPGA, and remove the psram chip(but keep the pad), use BL702 for programmer FPGA, refer to https://github.com/sipeed/RV-Debugger-BL702
- RGB led
Blink board led.
Visit example_led/led_pjt to see this project. Burn the led_pjt.fs into Tang Nano 1K to check your projuct.
- RGB 5_inch LCD
Drive the 5_inch RGB 40pin lcd screen.
Visit example_lcd/lcd_pjt to see this project. Burn the lcd_pjt.fs into Tang Nano 1K to check your projuct.
- RGB 4.3_inch LCD
Drive the 4.3_inch RGB 40pin lcd screen.
Visit example_lcd/lcd_480_272 to see this project. Burn the lcd_43.fs into Tang Nano 1K to check your projuct.
- RGB 7.0_inch LCD
This screen using the same driver as 5_inch LCD.
When you meet error code PR2017, just enable corresponding IO as regular IO.
Click Project in top menu bar and choose Configuration, then enable the corresponding Dual Purpose Pin to deal with this error.