A WiFi Controller for the Turing Pi V1 cluster board connected via the onboard I2C bus. With this contoller you are able to switch the power on or off of each individual Turing Pi slot. It provides a Web, REST and telnet interface. MQTT is not implemented yet.
At this point there is no warning of turning a slot ON/OFF, just one click and the slot is ON or OFF!
Find screenshots of all available web pages in the docs directory.
Find the precompiled firmware in the firmware directory.
This is a PlatformIO project.
If you need a clean PlatformIO build environment, use the scripts in the docker
directory.
After a firmware reset the following values are set.
value | description | |
---|---|---|
Admin user | admin | Setup admin user |
Admin password | admin | Setup admin password |
WiFi Mode | AP | Accesspoint- or Station-Mode |
WiFi SSID | tpictl-esp-id |
SSID in accesspoint mode |
WiFi Password | 12345678 | Default WiFi password |
Network Mode | DHCP | Network mode STATIC or DHCP *1 |
Network IP-Address | 192.168.192.1 | device ip address *2 |
Network Mask | 255.255.255.0 | Subnet mask *2 |
Network Gateway | 192.168.192.1 | Default gateway *2 |
Network DNS | 192.168.192.1 | DNS server address *2 |
*1 In WiFi Station-Mode only
*2 will be overwritten with DHCP-Response