Pinned Repositories
adafruit-Trellis_Push-and-Hold
functions for the adafruit trellis converting buttons to push and hold = three options per button
midiNotesTable_Arduino
this is a simple array of strings to call to to give correct note and octave for a given midi note value
Mozzi-kick-drum-samples
collection of .h files for mossi arduino audio library
OneWire_DS28EA00
OneWire extension for DS28EA00 chip
Teensy-16-RGB-rotary-encoder-SPI-panel
this is code for the PCB panel for 16 RGB rotary encoders from Sparkfun.
Teensy-eurorack-rotating-step-divider
simple sketch for using a Teensy 3.* as a eurorack rotating step divider. you can change your step dic values in the code
Teensy-Midi-Euclidean-Sequencer
A usbMidi euclidean sequencer on a Teensy 3.5 programmed using Arduino IDE
Teensy_eurorack_hihat
Teensy_simple_drum
This is code for a simple Eurorack drum module using the Teensy. All drum sound is synthesised using the Drum component of the Teensy Audio design tool
Teensy_UTFT_SD_onthefly_buttons
This is a small arduino sketch for Teensy that allows the user to select files from the SD card via a screen interface. It automatically updates the file list
mortonkopf's Repositories
mortonkopf/Teensy-Midi-Euclidean-Sequencer
A usbMidi euclidean sequencer on a Teensy 3.5 programmed using Arduino IDE
mortonkopf/Teensy-16-RGB-rotary-encoder-SPI-panel
this is code for the PCB panel for 16 RGB rotary encoders from Sparkfun.
mortonkopf/Teensy_UTFT_SD_onthefly_buttons
This is a small arduino sketch for Teensy that allows the user to select files from the SD card via a screen interface. It automatically updates the file list
mortonkopf/Teensy_eurorack_hihat
mortonkopf/Teensy_simple_drum
This is code for a simple Eurorack drum module using the Teensy. All drum sound is synthesised using the Drum component of the Teensy Audio design tool
mortonkopf/adafruit-Trellis_Push-and-Hold
functions for the adafruit trellis converting buttons to push and hold = three options per button
mortonkopf/Teensy-eurorack-rotating-step-divider
simple sketch for using a Teensy 3.* as a eurorack rotating step divider. you can change your step dic values in the code
mortonkopf/midiNotesTable_Arduino
this is a simple array of strings to call to to give correct note and octave for a given midi note value
mortonkopf/Mozzi-kick-drum-samples
collection of .h files for mossi arduino audio library
mortonkopf/OneWire_DS28EA00
OneWire extension for DS28EA00 chip
mortonkopf/Teensy-Euclidean-Sequencer-Eurorack
This is a eurorack version of the stand alone euclidean sequencer. Sends out four channels of CV gate
mortonkopf/Adafruit-neotrellis-latching-buttons-example
this is arduino code for the adafruit neotrellis, to provide latching on-off buttons rather than momentary buttons. They become push-on, push-off
mortonkopf/Half_done_pixel_poi_uploader
Pixel poi uploader for Teensy
mortonkopf/Pixi_demo
Demo Code for Analog shield
mortonkopf/gpio_expander
A library for drive a lot of GPIO chips with Arduino/Teensy3.x or LC
mortonkopf/MAX11300
Library for MAX11300 mixed signal IO
mortonkopf/OneWire_DS2413_array
An Arduino sketch that collects the addresses of all DS2413 devices on the string and puts the address info into an array
mortonkopf/q
C++ Library for Audio Digital Signal Processing
mortonkopf/Teensy-Android-app
This is a small app to send a text string to Teensy 3 via bluetooth using a simple Android app
mortonkopf/Teensy-bluetooth-receive-test
the simplest cut down sketch to test if a bluetooth module connected to Teensy Serial1 is functioning
mortonkopf/teensy-variable-playback
variable playback rate for teensy audio library
mortonkopf/Teensy_eurorack_shuffle_snare
code using the Teensy DSP tool to generate a four wave plus noise Snare triggered by CV input