NETI Gatekeeper is an open source project created to control a garage door with 3 phases motor using a single phase input with all the sensors needed. The PCB is designed with modularity in mind so that it will be easy to swap faulty hardware with new one.
- Wemos D1 Mini
- 2 channels relay board
- ACDC 5V power supply module
- 12/24V power supply for additional hardware (Eg. photosensors, radio receiver)
- EDG connectors (3.81mm pitch)
- 1x 2P (Vout)
- 1x 3P (Motor)
- 1x 3P (Lock relay for Mk3 and Mk6)
- 1x 7P (I/O)
- IEC C8 connector
- 1 channel relay board (Mk3 and Mk6 versions)
- Fuse and fuse holder (Mk5 and Mk6 versions)
- 2x 2P screw terminal blocks (5mm pitch)
- Buzzer 12mm
The motor can be wired both in Star or Delta and will require a Capacitor to invert the motor direction.
C *____________
/ \ |
{} {} =
L / \ N |
*___{}___* |
| | |
| | |
| | |
| | |
| | |
_L________N______C__
| |
| NETI PCB |
|__________________|