2jciebu-usb-raspberrypi

It is a sample program for evaluating Omron's sensor 2JCIE-BU with Raspberry Pi 3 Model B.

2JCIE-BU is a multifunction sensor module that can be used for sensing various environmental information.
Various sensors such as temperature, humidity, light, barometric pressure, noise, 3 axis acceleration, etc. are equipped.
Earthquakes can be judged based on highly accurate vibration acceleration.
We utilize a volatile organic compound (VOC GAS) sensor to realize continuous monitoring of indoor air quality.
USB and Bluetooth® are provided as interfaces.

language

Description

sample_2jciebu.py
It is a sample program that can acquire sensing data with the USB serial interface and check it on the console.
The LED lights up while data is being acquired.

DEMO:
When you run sample_2jciebu.py, you can see the sensing data on console.

Installation

It is necessary to install dependency software beforehand.
Dependencies

Open Terminal and execute the following command.

$ mkdir omron_sensor
$ cd omron_sensor
$ git clone https://github.com/omron-devhub/2jciebu-usb-raspberrypi.git

Usage

Procedure to operate the sample program.

sample_2jciebu.py
Open Terminal and execute the following command.

$ sudo modprobe ftdi_sio
$ sudo chmod 777 /sys/bus/usb-serial/drivers/ftdi_sio/new_id
$ sudo echo 0590 00d4 > /sys/bus/usb-serial/drivers/ftdi_sio/new_id
$ sudo python3 sample_2jciebu.py

To stop, press Ctrl + C.

Dependencies

2jciebu-usb-raspberrypi requires the following dependencies:

Contributors

Thank you to all our contributors !

Licence

Licensed under the MIT License.

ms-iotkithol-jp/2jciebu-usb-raspberrypi