2.8inch_ESP32-2432S028R cannot get any menus
Dudley1001 opened this issue · 1 comments
Well I thought I had some luck with this all in one display with a built in ESP32 Wroom 32 when I changed the pins for the xpt2046 MOSI,MOSO and CLK to share with sdcard. I do have it set to TFT_Card_Version 2. I get the calibration coming up and touch works but then the screen just goes black with no menus. I do have calibrate.txt on the sdcard and it reads it fine. I also get the wifi working and can access the webpage and can upload files. I just cannot get anything to the screen after the calibration is done or if the card is ejected.; I have tried everything I can think of so here is a zip file with the modified schematics, user_settings.h and config.h as well as the manual for the display assembly. Any help would be wonderful and thank you for the work on this project.
GRBL_Controlller_esp32_settings.zip
I gave up on that screen and picked up the proper 3.2"