mstrens/grbl_controller_esp32

Issues

• Compiled successfully but cannot be used, cannot communicate with Arduino + CNC Shield + GRBL 1.1h

  #67 opened 6 months ago by satriamahen
  0

• delete gcvt(savedWposXYZA[2], 3, floatToString);

  #66 opened 7 months ago by kangz543g
  1

• src/com.cpp:586:13: error: 'gcvt' was not declared in this scope

  #63 opened 2 years ago by cbcy1234
  2

• Switch from Wi-Fi to Bluetooth

  #65 opened 8 months ago by Pulai53
  0

• Card mount errors

  #64 opened 10 months ago by BoraMD
  0

• text section exceeds available space in board

  #53 opened 2 years ago by Henrikastro
  4

• Telnet connection to GRBL does not work.

  #61 opened 2 years ago by chgarde
  0

• USB stops working on GRBL when ethernet cable is connected between Controller ESP32 and GRBL ESP32

  #39 opened 2 years ago by cotepat
  17

• 2.8inch_ESP32-2432S028R cannot get any menus

  #56 opened 2 years ago by Dudley1001
  1

• 2.8inch_ESP32-2432S028R display support

  #55 opened 2 years ago by Dudley1001
  3

• Compilation error

  #54 opened 2 years ago by cfficaurzua
  1

• Serial2 causes reboot

  #45 opened 3 years ago by PetrOdst
  1

• compiling failed: SdFat.h: No such file or directory

  #50 opened 3 years ago by QGB
  4

• esp32c3 support?

  #49 opened 3 years ago by QGB
  0

• Jogging algorithm

  #48 opened 3 years ago by stevempotter
  0

• When WiFi is enabled STA & AP mode causes a pause in sending G code.

  #46 opened 3 years ago by zhangfan3765
  0

• I need help wiring ESP32 and TFT ... Gpio25 ---> CD doubt ...

  #44 opened 3 years ago by rselow
  3

• Can I cancel the key function of SD grbl?

  #43 opened 3 years ago by viewsat
  2

• Multi-Use for Pendant

  #42 opened 3 years ago by HackinSpock
  0

• License ?

  #41 opened 4 years ago by Skywalkerf34
  0

• Error when setting axis to zero

  #40 opened 4 years ago by williangomesa
  2

• When I press Set...axis, the message on the top left looks wrong.

  #38 opened 4 years ago by viewsat
  2

• When I set A axis=0, it becomes Z axis=0.

  #37 opened 4 years ago by viewsat
  2

• Temporary force USB mode

  #30 opened 4 years ago by thijszijlstra
  4

• bCNC Telnet connection

  #34 opened 4 years ago by thinkJD
  6

• Z-axis stops due to Alarm-1

  #14 opened 4 years ago by jaygcnc
  4

• bluetooth

  #11 opened 4 years ago by irshadmgs011
  2

• Wifi Bridge trobles

  #15 opened 4 years ago by achest
  1

• Parser issue, not catching wposOrMpos correctly, breaks handleLastNumericField()

  #16 opened 4 years ago by petervanderwalt
  5

• If the 5-axis is very good, thank you very much!

  #19 opened 4 years ago by cbcy1234
  1

• SDcard write problem

  #20 opened 4 years ago by aik3n
  3

• How can we make the telnet connection?

  #23 opened 4 years ago by MeKeCNC
  1

• support for 4 Inch HD 480x320 TFT Display with Touch Screen (for Rapberry Pi)

  #24 opened 4 years ago by ao41tr
  1

• 'File' does not name a type - Error when compiling

  #27 opened 4 years ago by PhilippEBZ
  5

• When I repeatedly press Pause/Resume several times,it will stop sending gcode.

  #33 opened 4 years ago by viewsat
  4

• Screen freeze when accessing GRBL sd card via telnet and telnet does not work

  #36 opened 4 years ago by mstrens
  0

• Does not compile on Mac without some tweaks

  #32 opened 4 years ago by cotepat
  1

• TFT problem

  #28 opened 4 years ago by krucho
  8

• Problem with programming the ESP32 module for the TFT display

  #26 opened 4 years ago by Freemind1964
  2

• No movement in Auto mode

  #25 opened 4 years ago by kaktus312
  5

• Switching to platformIO

  #22 opened 4 years ago by Sebclem
  1

• Wifi ip options

  #18 opened 5 years ago by stratogk
  1

• Unsupported command

  #4 opened 5 years ago by huangruijin
  1

• can not flash

  #6 opened 5 years ago by jasinghuang
  4

• Suggestion to use M5Stack ESP32 with built in 3 buttons and touch screen etc

  #12 opened 5 years ago by splitn2
  2

• No WiFi with last update

  #13 opened 5 years ago by Sp3cN4z
  1

• When will the 4-axis version appear?

  #8 opened 5 years ago by anshilike
  2

• I want to modify the directory interface.

  #10 opened 5 years ago by anshilike
  2

• Problem with TFT operation

  #7 opened 5 years ago by maximius
  3

• Tips go wrong. Expect your help.

  #5 opened 5 years ago by anshilike
  2