mstrens/oXs_on_RP2040

Issues

• Problem GPS

  #151 opened 5 days ago by antlerhanger
  5

• Barometer GY-63 + MPU6050 not recognized

  #150 opened 8 days ago by Eisbaeeer
  2

• GPS route in FRSKY always shows 0,.. does not change the value.

  #149 opened 2 months ago by Matorra
  8

• Poor precision (integer truncation) in RPM Calculation

  #148 opened 2 months ago by romoloman
  1

• ZTW Mantis G2 ESC telemetry support

  #112 opened a year ago by onki69
  35

• Add field RPM and Temperature for ELRS protocol

  #147 opened 2 months ago by Gjeremie
  2

• graphical user interface (gui) for oXs_on_RP2040

  #140 opened 4 months ago by Satcomix
  1

• Pull up enabled by default on RPM pin

  #146 opened 2 months ago by romoloman
  0

• Possible mixing ADS1115 #1 with #2?

  #145 opened 2 months ago by Merga189
  0

• dumpConfig() routine diplays "OFFSET =" instead of "OFFSET4 ="

  #144 opened 3 months ago by pat1300
  1

• Temp reading on V3

  #102 opened a year ago by Billy60
  2

• GPS and I2C sensors issue

  #143 opened 3 months ago by CodeWorksCZ
  5

• Parametrs fpr Ads1115

  #142 opened 3 months ago by Hainer2001
  0

• oXs Version 3.0.11 SBUS_out

  #141 opened 4 months ago by Satcomix
  0

• ESC HW Platinum V5 supported?

  #138 opened 4 months ago by ParkerEde
  31

• In Gpios tab, the nice image of the RP2040 is not diplayed any more.

  #139 opened 4 months ago by KeesBlokland
  0

• GUI remark

  #137 opened 4 months ago by Merga189
  12

• putty interface not working

  #136 opened 4 months ago by gugr05
  3

• Different Nunbers of GPS data

  #135 opened 4 months ago by Klippeneck
  1

• Baro rel. alt and vspeed are not transmitted via GPS frame in HoTT telemetry protocol when connected with GPS to an ELRS receiver

  #134 opened 5 months ago by Astor87
  0

• Is it possible to add G-Force Sensor GY-291 ADXL345 for MPX, HoTT, ELRS protocol to RP2040

  #133 opened 6 months ago by Astor87
  2

• Vertical speed with baro and mpu giving erroneous readouts

  #129 opened 6 months ago by hw999
  16

• Failsafe uses predefined values do not work on Version 2.12.0

  #132 opened 7 months ago by meyer1111
  7

• Adoption of XGZP6897D Differential Pressure Sensor

  #128 opened 9 months ago by jasc76
  19

• Gyro Subsystem

  #131 opened 7 months ago by doloebig
  17

• 2.12.0 tested lora version - Lora SPI SCK MISO and so on are not 255

  #130 opened 8 months ago by jasc76
  1

• add gyro functionality

  #115 opened a year ago by mstrens
  229

• oXs failsafe and flags

  #127 opened 8 months ago by hw999
  9

• Version 2.12.0 Debug message ???

  #126 opened 9 months ago by Satcomix
  2

• config.h

  #125 opened 9 months ago by secretman28
  6

• Hobbywing Capacity Problem

  #124 opened 9 months ago by Klippeneck
  19

• Sequencer functions oXs RP2040

  #108 opened a year ago by Satcomix
  372

• Filename lowercase in XGZP6897D.cpp?

  #123 opened 9 months ago by KeesBlokland
  2

• Add BLHeli_32 ESC telemetry support

  #122 opened 10 months ago by Steini63
  11

• Add MSP output for controlling DJI VTXs

  #121 opened 10 months ago by BladeScraper-Designs
  1

• oXs_RP2040 with ACS724 Current Sensor at ADS1115 A0

  #120 opened a year ago by Satcomix
  1

• OXS with ESC

  #116 opened a year ago by Klippeneck
  83

• Command enter issue

  #119 opened a year ago by J-charles-C
  2

• Baudrate telemetry data

  #118 opened a year ago by J-charles-C
  4

• Support Hobbywing ESC Telemetry

  #101 opened a year ago by m0p3d
  15

• Feature Request: Add ACCx/y/z data fields to the standard SPort/FPort protocol

  #104 opened a year ago by rieden1
  9

• Request : Add number of GPS SAT

  #117 opened a year ago by J-charles-C
  7

• Logger for oXs_RP2040

  #111 opened a year ago by Satcomix
  120

• RPM and Log GPio = Sensor Lost

  #114 opened a year ago by Satcomix
  31

• RTC function RP2040

  #113 opened a year ago by Satcomix
  14

• variable pwm no more servo output

  #109 opened a year ago by secretman28
  10

• 50Hz as PWMHZ default Ver 2.8.16 with FBUS Protocol

  #107 opened a year ago by Satcomix
  0

• Enhancement/Feature Request: MPU6050 calibration from Tx command

  #106 opened a year ago by rieden1
  4

• Unusual high values for Pitch and Roll

  #105 opened a year ago by Satcomix
  5

• Version 2.8.3 compiles without errors, but code does not run.

  #103 opened a year ago by KeesBlokland
  7