/pductl

pductl - Control outlets of ATEN PE PDUs (SNMPv3)

Primary LanguagePythonMIT LicenseMIT

pductl - Control outlets of ATEN PE PDUs

Installation

pip install atenpdu

Example configuration [~/.pductl]

{
  "format": 1,
  "pdus": {
    "pdu1": {
      "node": "pdu1",
      "service": "snmp",
      "username": "administrator",
      "authkey": "AAAAAAAAAAAAAA",
      "privkey": "BBBBBBBBBBBBBB"
    },
    "pdu2": {
      "authkey": "CCCCCCCCCCCCCC",
      "privkey": "DDDDDDDDDDDDDD"
    },
    "pdu3": {
      "node": "192.168.21.19",
      "service": "16161",
      "username": "joe",
      "authkey": "EEEEEEEEEEEEEE",
      "privkey": "FFFFFFFFFFFFFF"
    },
    "pdu4": {
      "community": "private"
    },
    "pdu5": {
    }
  }
}
  • authkey and privkey are required for SNMPv3. On absence, SNMPv2c gets used.
  • community defaults to private for SNMPv2c.
  • node defaults to PDU entry's name.
  • service defaults to snmp, i.e. port 161.
  • username defaults to administrator for SNMPv3.

Usage

pductl [-p <PDU>] list
pductl [-p <PDU>] <on|off|reboot|status> <OUTLET> [<OUTLET> ...]

Use ALL to select all outlets.