These are mods that I have designed for my V0.1 and Trident.
I hope you find some of them useful:
v0.1, v0.2 and Printers for Ants toolhead using 2 4010 part cooling fans and a 3010 fan for most hotends including the Dragon High Flow, Rapido High Flow and Revo Voron
v0.1, V0.2 and Printers for Ants toolhead has been specifically designed for the Rapido UHF, Dragon UHF, Goliath Air and Goliath Water hotends and uses 2 4010 part cooling fans and a 3010 hotend fan
v0.1, v0.2 and Printers for Ants toolhead using 1 5015 part cooling fans and a 3010 fan for most hotends including the Dragon High Flow, Rapido High Flow and Revo Voron
A series of mounts designed to allow mounting of any of the Dragon Burner, Rapid Burner or Mailbox toolheads to the Voron Trident and Voron 2.4
v0.1 and Printers for Ants toolhead using a 7040 CPAP fan for part cooling
v0.1 and Printers for Ants Extruder to complement the 5015 Toolhead using BMG parts
v0.1 and Printers for Ants Extruder to complement the 5015 Toolhead using Orbiter v2.0 parts
This extruder uses either the LGX Lite, TBG Lite, Orbiter v1.5 or Orbiter v2.0 extruder gears. It can be used on any printer that uses the Sherpa Mini mounting pattern
V0.1, v02 and Printers for Ants Nozzle purge and wipe mod
V0.1, v0.2 and Printers for Ants alternative Tophat for the Voron v0.1 which uses the BOM panels
Runout UnKlicky Sensor is a filament runout sensor
Diffuser and mounts for Daylight on a Matchstick on a v0.1, v0.2 and Printers for Ants
This is a modified X carriage for the v0.2 and Printers for Ants that uses heat inserts instead of M3 nuts
This converts the front panel of the v0.2 Tophat into a detachable door
These hinges are for the v0.2 Tophat. They allow you to remove the Tophat by opening it completely and then you can simply lift the Tophat off
Other v0.2 mods I've made for my own printer