For compatibility with FreePBX, use the Python 3.6 virtual environment
In config.py:
asterisk_multicast_address = '224.0.1.116'
asterisk_multicast_port = 5001
poly_multicast_address = '224.0.1.116'
poly_multicast_port = 7659 # DTMF 'poly'
poly_multicast_ttl = 32
poly_group = 26
poly_sender_id = 'Asterisk'
Minimum example settings to receive group page (group 1 is page group 26 above (25 + 1))
ptt.address="224.0.1.116"
ptt.port="7659"
ptt.pageMode.enable="1"
ptt.pageMode.group.1.available="1"
ptt.pageMode.group.1.allowReceive="1"
ptt.pageMode.group.1.subscribed"1"
SpectraLink PTT uses ports 5001 to 5025 mapped to the channels 1 to 25.
Note: Changing Poly Paging multicast address or port requires a reboot of the phone, even though the web UI does not indicate a reboot is necessary to apply the settings
© Copyright 2024 Stuart Wyatt
This project is licensed under the terms of the MIT license.