SIP Plugins
###A collection of user contributed plugins for the Raspberry Pi based irrigation controll software SIP.
####To ask questions and learn more about SIP and plugins please visit the SIP Forum
Please note: Unless otherwise stated: This is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
These programs are distributed in the hope that they will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. http://opensource.org/licenses/gpl-3.0.html
buzzer
This plugin has been created to provide simple audio feedback. This plugin is intended to be controlled through other plugins through the "buzzer_beep" signal. Buzzer should be connected to GPIO pin 32.
california_monthly
Provides automatic monthly adjustment of irrigation times based on historical weather data.
cli_control
Replaces rf_control. Sends command line commands to control remote stations e.g. RF devices.
email_adj
Sends status email to google email account
keypad
A plugin for using an 4X4 scanning keypad and buzzer to execute simple functions without the use of an external peripheral
lcd_adj
Uses I2C for LCD 16x2 char data display Requires pylcd2 library
monthly_adj
Adjust irrigation time each month
mqtt
This is the base mqtt plugin, it provides a shared MQTT client object for other plugins. Requires paho mqtt.
mqtt_schedule
Relies on MQTT, subscribes to a control topic and schedules run once programs as command by MQTT.
mqtt_slave
Relies on MQTT, subscribes to a control topic and allows one SIP system to control other SIPs using MQTT.
mqtt_zones
Relies on MQTT, broadcasts the current status of all zones.
pcf_8591_adj
Read sensor data (temp or voltage) from I2C PCF8591 ADC/DAC
pressure_adj
Checks water pressure when master station is switched on
proto
A bare bones plugin for use as a starting point for plugin authoring. (Installed by default)
pulse_cct
Pulses a selected circuit with a 2.5 Hz signal for 30 sec to discover the location of a valve
pump_control
Controls a pump relay via an Arduino over i2C. Checks pressure in pipe ensuring proper operation.
relay
Example plugin to demonstrate OSPi on-board relay
relay_16
A relaly_board update for use on 40 pin GPIO headers. Supports up to 16 relays. Requires SIP 3.2.43 or later.
relay_board
A plugin for using relay boards to control sprinkler valves, etc
signaling_examples
Example plugin provides functions triggered by signals from core program (installed by default)
sms_adj
Control your ospi using SMS (Short Message Service)
ssd1306
Plugin for SSD1306 128x64 pixel display connected to I2C interface with HW address 0x3c.
system_update
Allows updating OSPi software from integrated UI S (Installed by default)
telegram_bot
A simple telegram.org bot to interface with a SIP installation.
Run "pip install python-telegram-bot --upgrade" before installing this plugin.
weather_adj
Adjust irrigation schedule based on weather forecast
weather_level_adj
Adjust irrigation time based on weather forecast