by Mark Geurts mark.w.geurts@gmail.com
Copyright © 2017, University of Wisconsin Board of Regents
The TomoTherapy® Exit Detector Analysis Tool is a GUI based standalone application written in MATLAB® that parses TomoTherapy patient archives and DICOM RT Exit Dose files and uses the MVCT response collected during a Static Couch DQA procedure to estimate the fluence delivered through each MLC leaf during treatment delivery. By comparing the measured fluence to an expected fluence (calculated during optimization of the treatment plan), the treatment delivery performance of the TomoTherapy Treatment System can be observed.
In addition, this project includes the submodule CalcDose(), which uses the Standalone GPU TomoTherapy Dose Calculator to calculate the effect of fluence errors (measured above) on the optimized dose distribution and dose volume histogram for the patient. The submodule CalcGamma() is also included, and performs a 3D gamma analysis between the reference and DQA dose distributions using global 3%/3mm (or otherwise specified) criteria.
The user interface provides graphic and quantitative analysis of the comparison of the measured and expected fluence delivered, as well as a graphical display of the planned dose, recomputed dose, and 3D gamma. Finally a graphical and tabular comparison of structure dose volume histograms is included to investigate the clinical impact of the measured differences. A report function is included to generate a PDF report of the results for documentation in the patient's medical record.
TomoTherapy is a registered trademark of Accuray Incorporated. MATLAB is a registered trademark of MathWorks Inc.
To install the TomoTherapy Exit Detector Analysis Tool as a MATLAB App, download and execute the TomoTherapy Exit Detector Analysis.mlappinstall file from this directory. If downloading the repository via git, make sure to download all submodules by running git clone --recursive https://github.com/mwgeurts/exit_detector.
To run this application, run the App or call ExitDetector from MATLAB. Once the application interface loads, select browse under inputs to load the daily QA and static couch QA patient archive inputs. Once all data is loaded, the application will automatically process and display the results. If dose calculation is enabled, the user will be prompted whether to calculate dose, and if successful, whether to calculate Gamma.
See the wiki for information on configuration parameters, setting up a calculation server and beam models, and additional documentation.
Released under the GNU GPL v3.0 License. See the LICENSE file for further details.