Pinned Repositories
Calibrate_Stepper_Wheel
This is a code to calibrate the position of a wheel attached on a stepper motor. There is a magnet attached in the wheel and a hall effect sensor is placed on the fixed platform on which the whole stepper mechanism is placed. I am not using any library because I dont like the unknown processes takes place in the backend.
esp32-firmware-update
esp32-OTA
ESP32-SelfUpdate
esp32_Base64_to_decimal
esp32_ota
OTA all in one
ESP32_Process_Big_Data
ESP32_SIPO_10Stepper
ESP_Big_Data
ESP_IPv6
I am working(Actually trying) to connect ESP32 or ESP8266 with my IPv6 router. This repo is made to update my work. I'm sharing this repo where I have to update status of my work, I am open to modify this document from anyone. And I am open to collaborate on this until the project works successfully.
my-dudhwala's Repositories
my-dudhwala/ESP32_Process_Big_Data
my-dudhwala/ESP_Big_Data
my-dudhwala/ESP_IPv6
I am working(Actually trying) to connect ESP32 or ESP8266 with my IPv6 router. This repo is made to update my work. I'm sharing this repo where I have to update status of my work, I am open to modify this document from anyone. And I am open to collaborate on this until the project works successfully.
my-dudhwala/Calibrate_Stepper_Wheel
This is a code to calibrate the position of a wheel attached on a stepper motor. There is a magnet attached in the wheel and a hall effect sensor is placed on the fixed platform on which the whole stepper mechanism is placed. I am not using any library because I dont like the unknown processes takes place in the backend.
my-dudhwala/esp32-firmware-update
my-dudhwala/esp32-OTA
my-dudhwala/ESP32-SelfUpdate
my-dudhwala/esp32_Base64_to_decimal
my-dudhwala/esp32_ota
OTA all in one
my-dudhwala/ESP32_SIPO_10Stepper
my-dudhwala/FOTA
my-dudhwala/Intro
Config files for my GitHub profile.
my-dudhwala/OTA-TP
my-dudhwala/ota___web
my-dudhwala/OTA_BT_SelfGit_LocalWeb
my-dudhwala/OTA_PULL
my-dudhwala/profile
my-dudhwala/Read_SPIFFS
This is modified code or the original SPPIFS code provided in Arduino examples. This code shows files if there are any in the SPIFFS, creates a file, writes its data, defined in function calling instruction in Setup loop, then reads it. It can work for both Arduino and ESP32 and tested on ESP32.
my-dudhwala/SelfUpdate_with_BasicOTA
my-dudhwala/Test_Repo3
my-dudhwala/Version-control
my-dudhwala/WS2812B