LoRa SDR project

This project will make use of SDR hardware to receive and decode Lora.

Blog: https://myriadrf.org/blog/lora-modem-limesdr/

Repository layout

LoRa*.cpp - Pothos processing blocks and unit tests
RN2483.py - python utility for controlling the RN2483
examples/ - saved Pothos topologies with LoRa blocks

Noise simulation

This example demonstrates the LoRa PHY blocks using a looback path in the presence of noise.

examples/lora_simulation.pth - modem simulation

RN2483 receiver

This example receives and demodulates raw symbols with logic analyzer plot to view the symbols and triggered waveform plots to view the input. Once the example is activated, simply run the RN2483.py script to generate a single waveform to trigger the plots.

RN2483.py --freq=863.1e6 --bw=0.5e6 --sf=11 --tx="hello"
examples/rx_RN2483.pth

Simple relay

This example includes a simple client and relay app. The relay receives and decodes messages and relays them into another frequency and sync word. The client can post messages to the relay and view the response in a chat box widget.

examples/lora_sdr_relay.pth - LimeSDR LoRa relay
examples/lora_sdr_client.pth - LimeSDR LoRa client

Building project

First install Pothos: https://github.com/pothosware/pothos/wiki
Install Poco development files
- E.g. on Ubuntu: sudo apt-get install libpoco-doc libpoco-dev
Install JSON for Modern C++ development files
- E.g. on Ubuntu: sudo apt-get install -y nlohmann-json-dev
Finally, build the blocks in this repository:

git clone https://github.com/myriadrf/LoRa-SDR.git
cd LoRa-SDR
mkdir build
cd build
cmake ../
make -j4
sudo make install