mysensors/NodeManager

Issues

• SensorSHT31.h

  #551 opened 3 years ago by NickLplus
  3

• Moteino_M0 / _analog_reference

  #550 opened 3 years ago by NickLplus
  1

• Sensors do not report values if interrupts is enabled

  #547 opened 3 years ago by j54n1n
  2

• Changes for saving childs value in EEPROM

  #544 opened 3 years ago by j54n1n
  3

• SensorMQ debug issues

  #543 opened 3 years ago by j54n1n
  1

• Debug prints wrong floating point numbers

  #542 opened 3 years ago by j54n1n
  1

• Changes for PowerManager

  #540 opened 3 years ago by j54n1n
  1

• BH1750 reporting -10924

  #520 opened 5 years ago by user2684
  2

• [Question about a PR] HomeAssistant controller compatibilty

  #532 opened 4 years ago by nekromant
  10

• SensorDigitalOutput relay trigger

  #475 opened 6 years ago by Xedecimal
  7

• Motion sensor send only "Motion" event

  #534 opened 4 years ago by KooLru
  2

• SensorSI7021 Issue

  #531 opened 4 years ago by magtimmermans
  3

• Compile error when NODEMANAGER_SERIAL_INPUT is ON

  #529 opened 4 years ago by user2684
  0

• Migrate from travis-ci to Github Actions

  #528 opened 4 years ago by user2684
  0

• SensorDHT issue

  #527 opened 4 years ago by user2684
  0

• Add RemoteIR Sensor

  #525 opened 4 years ago by user2684
  0

• BME280/BMP280 high power comsumption when sleeping

  #522 opened 4 years ago by bpbastos
  9

• DigitalOutput safeguard is not stopped when sensor is turned off

  #521 opened 5 years ago by user2684
  0

• SensorSignal reports 0 if MY_SIGNAL_REPORT_ENABLED not defined in sketch

  #504 opened 5 years ago by liwenyip
  2

• Allow to set min/max value allowed

  #513 opened 5 years ago by user2684
  2

• Request Max and Min Range for all sensors

  #518 opened 5 years ago by iamyourexpert
  1

• Add option to enable/disable a sensor dynamically and remotely

  #500 opened 5 years ago by user2684
  0

• best way to set units via V_UNIT_PREFIX ?

  #492 opened 5 years ago by zerog2k
  3

• debounce for interrupt sensors not working

  #465 opened 5 years ago by MHofer
  2

• PowerManager is not working for BH1750

  #471 opened 5 years ago by RDG88
  4

• Multiple samples averaging error

  #501 opened 5 years ago by nielbierman
  2

• SensorPlantowerPMS compilation error for PMS::readUntil()

  #493 opened 5 years ago by user2684
  0

• The sensor order of BH1750 and BME280 matters

  #498 opened 5 years ago by deisi
  4

• bmp280 as dependency issue.

  #497 opened 5 years ago by deisi
  3

• TTP sensor not working

  #483 opened 5 years ago by Bottesford
  2

• MPR121 won't send value to controller

  #488 opened 5 years ago by Bottesford
  2

• Issues compiling for NRF5x

  #503 opened 5 years ago by user2684
  8

• More compiler warnings

  #473 opened 5 years ago by g0uus
  2

• Compiler Warnings indicating problems!

  #472 opened 5 years ago by g0uus
  2

• 'WDTCSR' was not declared in this scope

  #481 opened 5 years ago by Nalith
  4

• Compilation error on STM32F103C8

  #474 opened 5 years ago by user2684
  2

• use of MY_ESP8266_SSID and MY_ESP8266_PASSWORD deprecated

  #466 opened 5 years ago by mitchmitchell
  2

• Values not presenting in DisplaySSD1306

  #469 opened 5 years ago by user2684
  10

• DHT11 not sending any humidity data

  #489 opened 5 years ago by pleschev
  2

• ESP32 compilation error

  #491 opened 5 years ago by user2684
  1

• Compatibility issues with MySensors v2.3.2

  #507 opened 5 years ago by user2684
  0

• SensorBattery measure internal VCC on ATmega1284

  #496 opened 5 years ago by j54n1n
  4

• SensorMotion not working

  #502 opened 5 years ago by RolandWijnen
  2

• Cumulative reporting for rainGauge

  #499 opened 5 years ago by nielbierman
  2

• More intelligent send retry management with ACK

  #495 opened 5 years ago by asoltesz
  1

• PCA9685 not working due to onLoop() is not called

  #485 opened 5 years ago by sepo83
  3

• SensorAnalogIn - default max-value is 1024

  #486 opened 5 years ago by ploeffler
  1

• SIGSEGV in dma1() on STM32 HyTiny board

  #470 opened 6 years ago by mitchmitchell
  2

• SensorWaterMeter reporting flow information

  #468 opened 6 years ago by user2684
  0

• Options to allow SensorPulseMeter to report a pulse per time

  #467 opened 6 years ago by user2684
  0