raspberry

#Wiring the NRF 24L01+ radio

NRF24l01+	Rpi Header Pin
GND	25
VCC	17
CE	22
CSN	24
SCK	23
MOSI	19
MISO	21
IRQ	--

#Building & Installing

##RF24 library

Download the library from https://github.com/TMRh20/RF24
Either an official release(tested with 1.1.3) or clone the master branch.
Decompress(if needed) and change to the library directory
Run make all followed by sudo make install

##Serial Gateway

The standard configuration will build the Serial Gateway with a tty name of '/dev/ttyMySensorsGateway' and PTS group ownership of 'tty' the PTS will be group read and write. The default install location will be /usr/local/sbin. If you want to change that edit the variables in the head of the Makefile.

###Build the Gateway

Clone this repository
Change to the Raspberry directory
Run make all followed by sudo make install
(if you want to start daemon at boot) sudo make enable-gwserial

For some controllers a more recognisable name needs to be used: e.g. /dev/ttyUSB020 (check if this is free).

sudo ln -s /dev/ttyMySensorsGateway /dev/ttyUSB20

To automatically create the link on startup, add ln -s /dev/ttyMySensorsGateway /dev/ttyUSB20 just before exit0 in /etc/rc.local

#Uninstalling

Change to Raspberry directory
Run sudo make uninstall

Support: http://forum.mysensors.org

mysensors/Raspberry

DEPRECATED: See https://www.mysensors.org/build/raspberry