/Action_power-tools_battery_adapter

3D files to transform Action's Ferm (AX power) batteries into powerbank and portables power supplies

Creative Commons Attribution Share Alike 4.0 InternationalCC-BY-SA-4.0

Action_power-tools_battery_adapter

3D files to transform Action's Ferm (AX power) batteries into powerbank and portables power supplies.

Supported batteries

Recommended battery connectors (from Action)

Print settings

Recommended

  • Filament : PETG
  • Nozzle diameter : 0.4 mm
  • Layer height : 0.2 mm
  • Filling : 30-50% rectilinear
  • Support : required for the battery slot

Other tester settings

  • Filament :
    • PLA : Poor temperature resistance (avoid using it for high power application)
    • ABS : Important shrinking. You might need to adjust the part using a Dremel or a heat gun to fit the battery.
  • Nozzle diameter :
    • 0.6 mm : You might need to adjust the part using a Dremel or a heat gun to fit the battery.

Files

Battery slots and Boxes are linked together using 4x M3x25 screw

1 Battery

Part STL STEP Preview
Template STL File STEP File
XT60 STL file Step file
Box template STL file Step file
Box 2USB STL file Step file

Build instructions (1 battery 2 USB)

USB module

2 Batteries

Example

Part STL STEP Preview
Template File File
XT60 STL file Step file
Box template STL file Step file
Box 2USB STL file Step file

This project is adapted from the following file