nRF24/RF24

Issues

• [Question]: Can I use openWritePipe to modify the sending address before each shipment?

  #1012 opened 4 days ago by camerakang
  19

• startWrite does not toggle CE for long enough on STM32duino boards

  #1010 opened 25 days ago by arthurfprecht
  5

• Get Signal Strength

  #997 opened 4 months ago by justcallmekoko
  3

• RF 26

  #1008 opened 2 months ago by Poet-hack666
  2

• ESP32 dev kit1 + TFTLCD + nRF24L01 setup working for years stopped working after late revisions

  #1006 opened 2 months ago by rodd01
  11

• [Question]: ESP32 (using esp-idf-mirf) can not communicate with Arduino (using RF24)

  #1004 opened 3 months ago by ntdkhoa0410
  23

• [feature request] support ESP-IDF platform

  #925 opened a year ago by stefan123t
  51

• Problem with communicating to the module

  #993 opened 4 months ago by Sinamajidi
  13

• When using payload ack, the ack replied by the receiving end lags 4 times

  #1002 opened 3 months ago by camerakang
  10

• python wrapper needs pyproject.toml

  #1000 opened 3 months ago by 2bndy5
  3

• CE set LOW twice consecutively in `startConstantCarrier()`

  #986 opened 4 months ago by 2bndy5
  1

• Not setting channels or data rate properly

  #992 opened 4 months ago by justcallmekoko
  7

• FHSS

  #995 opened 4 months ago by HamzaYslmn
  27

• Trouble with receiving data on RP2040

  #983 opened 4 months ago by SilentWalker9
  1

• [Question]: Pico fails to transmit

  #994 opened 4 months ago by ParrSt
  8

• [Question]: PICO's not communicating

  #990 opened 5 months ago by AndyVotava
  3

• NRF24s not Working with Arduino UNO or Pro Mini but do on ESP8266

  #989 opened 5 months ago by Rodazak
  9

• can't find RF24 method inside RF24 module

  #979 opened 6 months ago by FalconCode10
  18

• Change `SERIAL_DEBUG` into `RF24_DEBUG`

  #980 opened 6 months ago by 2bndy5
  7

• [Question] Some modules take way longer to write()

  #978 opened 7 months ago by Luddi96
  6

• Problem using stopListening() and startListening()

  #977 opened 8 months ago by V1LL4pro
  3

• Unable to use SPI1 on the raspberry pi pico

  #975 opened 8 months ago by s07dd
  3

• NRF24L01 does not show all characters in the receiver

  #976 opened 8 months ago by saeidbina
  4

• Library blocks 11 pin

  #974 opened 8 months ago by mootfrost
  1

• Phasing out most Linux drivers

  #971 opened 9 months ago by 2bndy5
  1

• [Question] Address names used in examples problematic?

  #972 opened 9 months ago by MaartenJB
  8

• revise MRAA driver's GPIO

  #965 opened 9 months ago by 2bndy5
  0

• Use Linux kernel's character device API to implement IRQ capability

  #943 opened 9 months ago by 2bndy5
  113

• reorganize examples

  #960 opened 9 months ago by 2bndy5
  5

• ESP32 Core Panic on radio 0; No panic on Radio number 1, same wiring. How to troubleshoot?[Question]

  #939 opened 10 months ago by Tech500
  22

• Multiple senders one receiver

  #958 opened 10 months ago by vladosam
  1

• [Question] Issue using the ManualAcknowledgements.ino

  #949 opened 10 months ago by pfpp89
  11

• [Question] R24.h, testRPD(void) "Strong signal > 64dBm" : "Weak signal < 64dBm"

  #946 opened 10 months ago by hrolofs
  5

• RPi5 uses different gpio pin numbers (per Linux kernel update)

  #932 opened 10 months ago by SherbertLemon64
  48

• Pipe is sometimes returned at "255".

  #934 opened 10 months ago by bvernham
  15

• Is there a known ESP32 Deep Sleep issue with radio.powerDown()? [Question]

  #935 opened a year ago by Tech500
  19

• [Question] setChannel & setDataRate not read correctly by printPrettyDetails ?

  #938 opened a year ago by matou78
  4

• Can RF24 library be used with WiFi?

  #937 opened a year ago by Tech500
  4

• Can RF24 library be used with WiFi?

  #936 opened a year ago by Tech500
  2

• Radio.printDetails(); does nothing for MKR1010 but Radio.sprintfPrettyDetails(buffer); works fine????

  #933 opened a year ago by bvernham
  4

• [Question] NRF24 Transmitter get "stuck" when powered from wall power outlet

  #931 opened a year ago by mittlc
  2

• 'make' errors, and RF24 on RPi, aarch64-linux-gnu

  #930 opened a year ago by Givy
  18

• Calling radio.available() after failed transmission when using writeFast or startWrite causes interrupt loop

  #929 opened a year ago by audiophil-dev
  10

• namespace for utility drivers

  #926 opened a year ago by 2bndy5
  3

• ESP32 and two Infrared Temperature Sensors (MLX90614)

  #928 opened a year ago by UdiNuwan
  1

• Multiple I2C buses In ESP 32 with multiple ports

  #927 opened a year ago by UdiNuwan
  0

• STM32F411 doesn't receive data

  #924 opened a year ago by iGerchak
  4

• nRF24L01+ gets recognized as nRF24L01 after software reboot

  #923 opened a year ago by CommanderRedYT
  7

• NRF24L01 does not work with my Arduino

  #922 opened a year ago by vanLindenberg
  1

• Calling from a C++ class causes weird behaviour on Linux

  #921 opened a year ago by LollosoSi
  3