Add breakpoints to CI (e.g. GitHub Action workflows): pause workflows, access the workflow with SSH, debug and resume executions.
Have you ever wished you could have debugged an issue in CI (e.g. GitHub Actions), by SSHing to where your build or tests are running?
Breakpoint helps you create breakpoints in CI: stop the execution of the workflow, and jump in to live debug as needed with SSH (without compromising end-to-end encryption).
You can make changes, re-run commands, and resume the workflow as needed. Need more time? Just run breakpoint extend to extend your breakpoint duration.
And it's 100% open-source (both client and server).
ℹ️ Workflows that have active breakpoints are still "running" and continue to count towards your total CI usage.
Breakpoint loves GitHub Actions. You can use the Breakpoint Action to add a breakpoint to a GitHub workflow; but most importantly, you can add breakpoints that only trigger when there's a failure in the workflow.
The example below triggers the Breakpoint only if the previous step (i.e. go test) failed. When that happens, Breakpoint pauses the workflow for 30 minutes and allows SSH from GitHub users "jack123" and "alice321".
jobs:
go-tests:
runs-on: ubuntu-latest
permissions:
id-token: write
contents: read
steps:
- name: Checkout
uses: actions/checkout@v3
- name: Run Go tests
runs: |
go test ./...
- name: Breakpoint if tests failed
if: failure()
uses: namespacelabs/breakpoint-action@v0
with:
duration: 30m
authorized-users: jack123, alice321When Breakpoint activates, it will output on a regular basis how much time left there is in the breakpoint, and which address to SSH to get to the workflow.
┌───────────────────────────────────────────────────────────────────────────┐
│ │
│ Breakpoint running until 2023-05-24T16:06:48+02:00 (29 minutes from now). │
│ │
│ Connect with: ssh -p 40812 runner@rendezvous.namespace.so │
│ │
└───────────────────────────────────────────────────────────────────────────┘You can now SSH the runner, re-run builds or tests, and even do changes.
If you need more time, run breakpoint extend to extend the breakpoint duration
by 30 more minutes (or extend by more with the --for flag).
When you are done, you can end the breakpoint session with breakpoint resume.
By default, the Breakpoint Action uses a shared rendezvous server provided by
Namespace Labs for free. Even though a shared server is used, your SSH traffic is always encrypted end-to-end (see Architecture).
Check out the Breakpoint Action for more details on what arguments you can set.
To activate a breakpoint, you can run:
$ breakpoint wait --config config.jsonThe config file can look like as follows:
{
"endpoint": "rendezvous.namespace.so:5000",
"shell": ["/bin/bash"],
"allowed_ssh_users": ["runner"],
"authorized_keys": [],
"authorized_github_users": ["<your-github-username>"],
"duration": "30m"
}The wait command will block the caller and print an SSH endpoint that you can connect to:
┌───────────────────────────────────────────────────────────────────────────┐
│ │
│ Breakpoint running until 2023-05-24T16:06:48+02:00 (29 minutes from now). │
│ │
│ Connect with: ssh -p 40812 runner@rendezvous.namespace.so │
│ │
└───────────────────────────────────────────────────────────────────────────┘Once you are logged into the SSH session, you can use breakpoint CLI to extend the breakpoint duration, or resume the workflow (i.e. exit the wait):
breakpoint extend --for 60m: extend the wait period for 30m more minutesbreakpoint resume: stops Breakpoint process and release the control flow to the caller of thewaitcommand
Breakpoint consists of two main components: rendezvous (where public connections are terminated) and breakpoint.
When a breakpoint is created, the CLI blocks until an expiration time has passed.
Meanwhile, it establishes a QUIC connection to rendezvous, which allocates a
public endpoint (with a random port) that will be reverse proxied back to the
running breakpoint; each connection then serves a SSH session (from a ssh
service embedded in breakpoint). SSH sessions do not start new user sessions,
and always run commands using the same uid as the parent breakpoint wait as
well.
The first QUIC stream breakpoint -> rendezvous is used for gRPC; rendezvous
expects a Register stream in order to allocate an endpoint, and will serve
that endpoint while the corresponding gRPC stream is active.
Because the SSH session is established end-to-end, rendezvous is not capable of performing a man-in-the-middle attack.
The CLI implements pausing by blocking the caller process. The command
breakpoint wait blocks until either the user runs breakpoint resume or the
wait-timer expires. The communication between the wait process and the CLI is
implemented with gRPC.
On receive a connection, rendezvous establishes a new QUIC stream over the
same connection that was registered previously, in the direction rendezvous -> breakpoint and performs dumb TCP proxying over it, without the need of additional framing.
The lack of additional framing in addition to QUIC's streams having independent control flow (i.e. no shared head of the line blocking), make QUIC a perfect solution for this type of reverse proxying (in fact, cloudflare uses similar techniques in Cloudflare Tunnel).
The SSH service in breakpoint only accepts sessions from pre-referenced keys or public SSH keys configured by GitHub users. These are specified in the configuration file when the breakpoint is created (or as arguments to the GitHub action).
You can specify GitHub usernames in the github_usernames config field. Breakpoint automatically fetches the SSH public keys from GitHub for these users. You can also specify the SSH keys directly via the authorized_keys field.
The SSH service always spawns processes with the same uid as breakpoint wait, and by default accepts any requested username. This can be limited by setting the allowed_ssh_users configuration field.
For example, the following config.json allows access to "jack123" and "alice321" GitHub users with a SSH user called "runner".
{
"allowed_ssh_users": ["runner"],
"authorized_github_users": ["jack123", "alice321"]
}breakpoint is able to request a fresh GitHub-emitted workflow identifying token, that it sends to rendezvous.
rendezvous has the ability to verify these, and performs access control based on the repository where the invocation was originated.
Even if no access control is enforced, repository information is logged by rendezvous if available.
Namespace Labs runs a public rendezvous server that is open to everyone. But you can also run your own (see below).
Although rendezvous facilitates pushing bytes to workloads running in workers (which would otherwise not be able to offer services), the bytes it proxies are not cleartext. Breakpoint establishes end-to-end ssh sessions.
To use the shared rendezvous, use the following endpoint:
{
"endpoint": "rendezvous.namespace.so:5000"
}See our documentation on how to run your own instance of rendezvous.
Here's a list of features that we'd to tackle but haven't gotten to yet.
- Traffic rate limiting: neither the Rendezvous Server nor the Breakpoint client restrict network traffic that is proxied. So far this hasn't been an issue because GitHub runners themselves are network capped.
- The Rendezvous Server does not implement a control and monitoring Web UI.
- Neither the Rendezvous Server nor the Breakpoint client expose metrics.
- The Breakpoint session does not automatically extend itself if an SSH connection is active. You need to explicitly extend the session with
breakpoint extend. - Configurable ACLs on the Rendezvous Server to specify the list of repositories and organizations allowed to connect to the server.
- Support for more authentication schemes between
breakpointandrendezvous. Breakpoint client and Rendezvous Server only support GitHub's OIDC-based authentication today. - Team and Organization authorization of users in Breakpoint client's SSH service (i.e. specifying a team or org rather than individual usernames).
Breakpoint welcomes your help! We appreciate your time and effort.
If you find an issue in Breakpoint or you see a missing feature, feel free to open an Issue on GitHub.
Check out our contribution guidelines for more details on how to develop Breakpoint.
If you have questions, ideas or feedback, chat with the team on our Discord server.