/curaProfiles

Cura PRINTER Settings

Prusa i3 MK2 Original

START GCODE

G21 ; set units to millimeters
G90 ; use absolute positioning
M82 ; absolute extrusion mode
M140 S{material_bed_temperature} ; set bed temp
M104 S{material_print_temperature} ; set extruder temp
G28 W ; home all without mesh bed level
M109 S{material_print_temperature} ; wait for extruder temp
G80 ; mesh bed leveling
M190 S{material_bed_temperature} ; wait for bed temp

G92 E0.0 ; reset extruder distance position
G1 Y-3.0 F1000.0 ; go outside print area
G1 X60.0 E9.0 F1000.0 ; intro line
G1 X100.0 E21.5 F1000.0 ; intro line
G92 E0.0 ; reset extruder distance position

END GCODE

M104 S0 ; turn off extruder
M140 S0 ; turn off heatbed
M107 ; turn off fan
G1 X100 Y210; home X axis and push Y forward
M84 ; disable motors

Bed Settings

  • X = 250mm
  • Y = 210mm
  • Z = 200mm
  • Build Plate Rectangular
  • Machine center is NOT zero
  • Heated Bed Enable

PRINTHEAD SETTINGS

  • Xmin = 31mm
  • Ymin = 40mm
  • Xmax = 34mm
  • Ymax = 31mm
  • Gantry = 28mm
  • Nozzle = 0.4 (varies)