Extending Salt's capabilities for event-driven network automation and orchestration: ITNOG 2019 tutorial
This repository contains the Pillars and the extension modules used during the live demo for the ITNOG on the road tutorial, at the EOLO NIC event.
During the live demo I have provided access to several https://www.digitalocean.com/ Droplets, from where we can manage Juniper and Arista VMs, courtesy of https://www.tesuto.com/.
As the resources are limited, the users are also able to follow the steps together with me, by starting up the Salt processes using Docker, see the :ref:`docker` section below. Similarly, this could be useful for anyone that would like to repeat the demo offline.
There are 10 droplets you can use, srv1.automatethe.net
,
srv2.automatethe.net
... srv10.automatethe.net
. The credentials will be
provided during the live session.
mircea@master-roshi ~
> ssh salt@srv1.automatethe.net
Linux srv1 4.9.0-9-amd64 #1 SMP Debian 4.9.168-1+deb9u2 (2019-05-13) x86_64
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Fri Jun 7 08:15:25 2019 from 89.34.165.210
salt@srv1:~$
On each Droplet there's a Salt Master running, and two Proxy Minions, named
eos<ID>
and junos<ID>
, e.g., eos1
and junos1
on
srv1.automatethe.net
- ready to be used. Example:
salt@srv1:~$ sudo salt \* test.ping
junos1:
True
eos1:
True
The Master config file used in this case is the one from this repository - https://github.com/mirceaulinic/itnog2019-tutorial/blob/master/master:
open_mode: true
pillar_roots:
base:
- /srv/salt/pillar
file_roots:
base:
- /srv/salt
- /srv/salt/extmods
For simplicity, the /srv/salt
directory is a symlink to
/home/salt/itnog2019-tutorial
which is the place where this repository has
been cloned:
salt@srv1:~$ ls -la /srv/salt
lrwxrwxrwx 1 root root 27 Jun 6 09:56 /srv/salt -> /home/salt/itnog2019-tutorial
salt@srv1:~$
Therefore, the Master is going to load the Pillar data from the pillar
directory in this repository, and the extension modules from the extmods
directory in this repository, respectively.
When using Docker, please see the Docker installation instructions: https://docs.docker.com/install/, as well as Docker Compose: https://docs.docker.com/compose/install/.
Clone this repository and move into the itnog2019-tutorial
directory:
$ git clone https://github.com/mirceaulinic/itnog2019-tutorial.git
$ cd nanaog76-tutorial/
Edit the pillar/junos_pillar.sls
and / or pillar/arista_pillar.sls
with
the connection credentials to a virtual machine or real device.
To verify that the credentials are correct and it is possible to connect to the device, you can use the NAPALM CLI tool, e.g.,
$ docker run --rm -ti mirceaulinic/salt-proxy:2019.2.0 \
napalm --vendor junos \
--user salt \
--password password \
junos.itnog2019-demo.digitalocean.cloud.tesuto.com \
call get_facts
During the live session, it is possible to use the following hostnames to
connect to a Tesuto-provided Juniper or Arista VM,
junos<ID>.itnog2019-demo.digitalocean.cloud.tesuto.com
, or
eos<ID>.itnog2019-demo.digitalocean.cloud.tesuto.com
, e.g.,
junos5.nano76-demo.digitalocean.cloud.tesuto.com
. Otherwise, you should be
able to use any VM or real device you might have available.
To start the environment for Junos, you can execute:
$ make up PROXYID=juniper-router
docker-compose up -d
Creating salt-proxy-juniper-router ... done
Creating salt-master ... done
Or for Arista:
$ make up PROXYID=arista-switch
docker-compose up -d
Creating salt-master ... done
Creating salt-proxy-arista-switch ... done
Jump into the salt-master
container from where we'll be running command
from now on: