nazzrim/Open3DScanner

Issues

• Documentation chapter 2: cheaper mechanical or by hand turntables

  #20 opened a year ago
  1

• Add jumpers for microstepping

  #19 opened 5 years ago by nazzrim
  0

• Add some information about the backplate

  #9 opened 5 years ago by nazzrim
  0

• Prevent confusion based on the project name

  #11 opened 5 years ago by nazzrim
  1

• Light control not always working as intended

  #8 opened 5 years ago by nazzrim
  0

• Pausing scans via pressing the knob always aborts the scan

  #1 opened 5 years ago by nazzrim
  0

• Increase height of stands to provide a wider range of possible configurations.

  #3 opened 5 years ago by nazzrim
  0

• UI errors during scan

  #15 opened 5 years ago by nazzrim
  0

• Add a one page flyer

  #12 opened 5 years ago by nazzrim
  1

• The CC-BY-NC-SA license may not be a good choice

  #10 opened 5 years ago by nazzrim
  1

• Add some kind of endstop for auto-homing the scanner

  #7 opened 5 years ago by nazzrim
  0

• Make the starting position for scans chosable via the knob

  #6 opened 5 years ago by nazzrim
  0

• Add some kind of diffuser to the light

  #5 opened 5 years ago by nazzrim
  0

• Provide some example scans

  #4 opened 5 years ago by nazzrim
  0

• Change STEC12E08 Rotary Encoder a module

  #2 opened 5 years ago by nazzrim
  0