Issues
- 3
Relay Attack
#85 opened by johnb21098 - 0
Support BeagleConnect™ Freedom
#95 opened by bleedinge - 0
Feature request: parse Microsoft "Swift Pair" MSD + possible improvement on CDP parsing
#94 opened by XenoKovah - 12
- 16
pcap storage of sent packets?
#83 opened by jsmif - 6
Master branch works with -s /dev/ttyUSB0 but fails with -s /dev/serial/by-id/<long Sonoff name>
#93 opened by jsmif - 5
Extended advertising capture failing after a while with multiple advertisers
#91 opened by sultanqasim - 2
Ext cap not detected
#86 opened by JahazielLem - 1
(device disconnected or multiple access on port?)
#89 opened by cornpo - 0
- 2
initiator.py cannot connect target
#87 opened by pic7oris - 3
Trouble with receiving 2m and coded phy
#84 opened by IakovlevAA - 10
Feature request: graceful malformed packet drop
#75 opened by jsmif - 1
Catsniffer release hex
#82 opened by JahazielLem - 6
- 10
- 3
Questions, Requests - Quiet parameter in Wireshark, Delta time column populated, Custom GATT dissection
#78 opened by phgarman - 5
Question: temporary-follow support?
#80 opened by jsmif - 2
- 5
(Question) Sniffle ubertooth-specan-ui port
#77 opened by alphafox02 - 4
- 41
- 14
Sonoff dongle error "XDS110 not found"
#71 opened by XenoKovah - 2
decoding packets in secure connection (le audio)
#73 opened by tamv12 - 8
Blank Output after Build for CC2652RB1F
#59 opened by Michaelszeng - 4
Full packet not written to pcap file
#72 opened by mkabjian - 22
- 3
Sending UART commands from external MCU
#58 opened by Michaelszeng - 1
Release LL relay features
#44 opened by mdlam92 - 1
availability on pypi
#49 opened by ffontaine - 22
- 3
Forcing a repairing of bluetooth devices
#50 opened by PowerPress - 1
active scan mode can not get connect_ind packet
#68 opened by LeeKoTo - 5
Coded Phy Advertising Reception.
#66 opened by froloffw7 - 3
update to use UART2 drivers
#54 opened by stevewillson - 2
CC2652RB firmware flash failure
#56 opened by jsmif - 1
- 1
Typo: orhter
#55 opened by jsmif - 1
Run sniff_receiver.py Error
#62 opened by TiltedChris - 3
Does Sniffle support active scanning mode?
#61 opened by 1-tong - 1
Sniffing all advertisements on all channels
#57 opened by jsmif - 7
Feature request: integragtion with Wireshark
#38 opened by maichai - 2
Is the CC2650STK supported?
#47 opened by jackjansen - 7
Successful build of Sniffle for CC2651P3?
#45 opened by stevewillson - 3
Unable to build working firmware
#43 opened by mh- - 4
Errors with 1.5 on CC1352-P2
#36 opened by maichai - 0
- 0
- 0
- 0