Many people from the retro community still have their beloved joysticks and gamepads from the early days. These devices often live their lives somewhere in the dark corners of our basements and we don't dare to throw them away, because of nostalgic reasons. They remind us so much of our childhoods, where we played our Wing Commanders, X-Wings, Descents and many other games. These old joysticks were all made to be connected to the game port, usually on a sound card. But by the end of 90's and beginning of 2000's game ports vanished from our computers and were replaced by USB and our old joysticks disappeared into the past. Today not everybody has a full retro PC and many people are using their modern computer with DOSBox to play the old games, sometimes with a modern USB joystick. But wouldn't it be great to play the old games with the same joystick which we used back then? And this is where this adapter comes into play. It can be used to connect gameport joysticks to a USB port.
GamePort Adapter Videos:
The adapter is built around Arduino Pro Micro, which uses the same ATmega32U4 microcontroller as Leonardo. This microcontroller has built-in USB HID capabilities and can be used to build HID input devices, like joysticks. The adapter itself is super simple, the main brainwork was invested into the software. Very much simplified, it reads the joystick states and sends the data, via USB, to the computer, which thinks that it is communicating with a USB joystick.
There are already plenty of gameport to USB adapters for basic analog joysticks and, as far as I know, there were some efforts to communicate with Sidewinder joysticks by Microsoft as well. But there is no universal adapter, which would work with different types of joysticks. This adapter implements multiple drivers for various analog and digital joysticks, with an option to add more, in the future.
Features overview:
- Support for generic analog joysticks with 2/4 buttons and 2/4 axes
- Four switches to select joystick type
- Autodetection for various digital protocol joysticks
- Auto-Calibration
- Very low input lag
Many people call button-only joysticks or gamepads digital. This is kind of right, because a button is either pressed or not. You can't have an analog values in between. However by digital, in this case, we mean something different. A gameport contains 15 pins, 8 of which are used for joystick communication. 4 pins are for buttons and carry digital values in sense of on/off and 4 pins are for analog axes, which deliver voltage somewhere between 0V and 5V. Joysticks which were made in the early days used this pinout. They could have a maximum of 4 buttons and 4 axes and were DOS compatible. Later, in the time of Windows 95/98 many joysticks were made to be plugged into a gameport as well, but they were not limited to 4 buttons and 4 axes. They had a lot more exciting features, like hat switches and throttle controls. But how did this work? Well the manufacturers implemented their drivers to communicate with the joystick via gameport using a proprietary communication protocol. For example, by using one pin of the gameport as clock and another one as data, the possibilities were almost limitless. Such joysticks are called digital as well, because they used digital protocols to communicate with the PC. And suddenly, many features were possible, but the price of these features was the lost compatibility to DOS. You couldn't just plug such a joystick into the gameport and expect it to work in old DOS games. The plug was the same, but the signaling was completely different.
Currently, the following drivers are implemented. To select the right driver, you have to use four switches, as shown in the table. The switches may be changed or extended in the future, so please pay attention to the updates.
| Joystick Model | Buttons | Axes | Hat | SW1-4 | Protocol | Comments |
|---|---|---|---|---|---|---|
| Generic Analog | 2 | 2 | 0 | 0000 | Analogue | |
| Generic Analog | 4 | 2 | 0 | 1000 | Analogue | |
| Generic Analog | 4 | 3 | 0 | 0100 | Analogue | 3rd Axis is throttle |
| Generic Analog | 4 | 4 | 0 | 1100 | Analogue | |
| CH FlightStick | 4 | 4 | 1 | 0010 | Analogue | |
| CH F16 Combat Stick | 10 | 3 | 1 | 0110 | Analogue | |
| ThrustMaster | 4 | 3 | 1 | 1010 | Analogue | |
| Sidewinder GamePad | 10 | 2 | 0 | 1110 | Sidewinder | |
| Sidewinder 3D Pro | 8 | 4 | 1 | 1110 | Sidewinder | |
| Sidewinder 3D Pro Plus | 9 | 4 | 1 | 1110 | Sidewinder | First version of Precision Pro |
| Sidewinder Precision Pro | 9 | 4 | 1 | 1110 | Sidewinder | |
| Sidewinder FFB Pro | 9 | 4 | 1 | 1110 | Sidewinder | FFB not yet implemented |
| Sidewinder FFB Wheel | 8 | 3 | 0 | 1110 | Sidewinder | FFB not yet implemented |
| Gravis GamePad Pro | 10 | 2 | 0 | 0001 | GrIP | |
| Logitech WingMan Extreme | 6 | 3 | 1 | 1001 | ADI | |
| Logitech CyberMan 2 | 8 | 6 | 0 | 1001 | ADI | |
| Logitech WingMan Interceptor | 9 | 3 | 3 | 1001 | ADI | 2 hats are mapped as 4 axes |
| Logitech WingMan Light | 2 | 2 | 0 | 0000 | Analogue |
Remarks:
- Please pay attention to how the same switches are used for different families of digital devices. This is possible due to fully digital communication. Using this method, the adapter implements autodetection as soon as it knows, that it is connected to a digital joystick.
- Currently, only the drivers for the listed Sidewinder devices are implemented, since I have no other models at hand. The Precision Pro works natively on USB as well, but was still implemented, because we can.
- Gravis used their GrIP protocol, which is currently implemented only for the Gravis GamePad Pro, but without daisy chaining possibility so far.
- The implementation of the ADI protocol used by Logitech should work with all the devices which support that protocol. However only the listed Logitech devices were tested so far.
Many joysticks in the wild are using the same digital protocol or are backwards compatible to the analog joysticks as they were used back in the days in DOS. Following list contains all the devices which were reported by others as working so far:
- CH Mach I+ (analog, 2-axes, 2-buttons)
- Gravis Analog Pro (analog)
- Gravis GamePad Pro
- Gravis PC GamePad (analog)
- InterAct UltraRacer PC (analog)
- Logitech CyberMan 2
- Logitech WingMan Extreme Digital
- Logitech WingMan Interceptor
- Logitech WingMan Light
- Medion Joypad MD9823 (analog, 4-axes, 4-buttons)
- QuickShot QS-123E "Warrior 5" (analog)
- Quickshot QS-146 "Intruder 5" (analog)
- Quickshot QS-151 "Aviator" (analog)
- QuickShot QS-201 "Super Warrior" (analog)
- QuickShot QS-203 "Avenger" (analog)
- Sidewinder 3D Pro
- Sidewinder 3D Pro Plus
- Sidewinder ForceFeedBack Pro
- Sidewinder ForceFeedBack Wheel
- Sidewinder GamePad
- Sidewinder Precision Pro
Sidewinder 3D Pro can be switched between analog and digital mode and in analog mode it can emulate the ThrustMaster and CH FlightStick. That's why you see them in the table above. Unfortunately I don't possess those joysticks in reality, so it may be that the implementation is not quite correct.
Old analog joysticks have resistors inside, which are specified to be 100 kOhm. Unfortunately, these resistors are either worn out, bad quality or were wrong from the beginning. Therefore most of the generic analog joysticks had adjustment screws to correct the center point of the joystick. Also many games had calibration options in their settings to readjust the joystick. With USB and new digital solutions the calibration was not required anymore and was completely implemented in the joysticks and/or drivers. Many modern games have no option to re-calibrate the joystick anymore. If we try to play such newer games with an old analog joystick through this adapter, the joystick center point would be totally offset. That's why the adapter implements auto calibration internally and presents already corrected values to the operation system.
ATTENTION: a hard requirement for using the analog joysticks is that during plugging into the USB port all axes must be in their middle state, because all the subsequent calibration happens based on the initial state.
The code is well documented, so if you are interested in the details, feel free to take a look into the driver implementation. All the analog joysticks were actually a straight forward task, but the Sidewinder digital protocol was kind of tough. There are already some implementations of Sidewinder protocol made for Arduino. However, they are mostly only for the Sidewinder GamePad and not really universally made. In the end I was heavily inspired by the Linux Sidewinder driver implementation. The code you can see in this project is a complete rewrite, I just took the Linux driver implementation as a reference to understand how it works. Also the Sidewinder patent US#5628686A helped a lot, especially with switching between digital and analog mode for Sidewinder 3D Pro.
In opposition to the already mentioned Sidewinder for Arduino implementations, this one doesn't rely on interrupts. This implementation is from a similar idea to what the Linux driver does. It polls the port and makes a lot of things simpler due to synchronous process. The biggest problem was that the Sidwinder devices send the data incredibly fast, with a clock pulse of only 5us. It was not possible to use Arduino's digitalRead(...) function for that. It was too slow with about 2.7us per call on an Arduino Pro Micro of 16MHz. It simply made it impossible to poll 5us pulses, with such a slow function, not even considering doing something with the data in between. So out of that need, my own implementation came about, which is up to 50% faster and needs only about 1.6us per call, on the same hardware. The custom I/O functions made it possible to read the data with the speed which a Sidewinder joystick requires. The best part is that the code is written in pure C++. It is very simple to read and to use. There are no macros, no assembler or any dirty hacks, just a lot of optimization.
The hardware is super simple. To build an adapter you'll need the PCB from this project and following parts:
| Part | Qty | LCSC # | Digikey # | Mouser Electronics # | Comment |
|---|---|---|---|---|---|
| CONN1 | 1 | C77835 | 609-5371-ND | 523-L77SDA15SA4CH4F | DB15 female connector |
| R1..R4 | 4 | C172965 | 13-MFR-25FTE52-100KCT-ND | 603-MFR-25FTE52-100K | 100 kOhm resistors |
| SW1 | 1 | C15781 | 2449-KG04ET-ND | 642-DS04T | DIP-4 switch |
| U1 | 1 | C72120 | ED3051-5-ND | 649-DILB24P-223TLF | DIP24 Socket (optional) |
| U1 | 1 | N/A | 1568-1060-ND | 474-DEV-12640 | Arduino Pro Micro (ATmega32U4 16MHz, 5V), including two 12 pin header connectors, MicroUSB version (see "Known issues") |
-
Some axes on an analog joystick are offset
Auto calibration requires all the axes to be in the center position during initialization. Please see the paragraph about auto calibration.
-
Joystick doesn't work
Make sure that you are using one of supported joysticks or a joystick which can work in legacy analog mode
-
MicroUSB port on the Arduino is not stable enough
Use the USB-C version of the Arduino instead.
Or always keep the MicroUSB cable attached to the Arduino MicroUSB version to avoid further wear and apply plug/unplug operations only on the remote side of the cable.
The best way is to implement more drivers. Since I have only the joysticks mentioned above, I can't contribute more than what is currently included.
I would like to give some special thanks to Creopard from the German dosreloaded.de community for providing me the mentioned joysticks. Without that donation this project wouldn't be possible. Especially dealing with Sidewinder 3D Pro was a very exciting task.