neilh10/ModularSensors

Issues

• Processing HTTP codes

  #176 opened a month ago by neilh10
  1

• Other 20x proccessing

  #161 opened 8 months ago by neilh10
  1

• WioT skips an hour

  #169 opened 4 months ago by neilh10
  1

• SAMD51 sleep tradeoffs

  #170 opened 4 months ago by neilh10
  0

• Option to not send to cloud

  #168 opened 4 months ago by neilh10
  2

• Require Valid time hierarchy

  #163 opened 7 months ago by neilh10
  0

• Json Compression

  #162 opened 8 months ago by neilh10
  0

• MQTT interworking

  #139 opened a year ago by neilh10
  1

• Config Sensor for notused

  #159 opened 8 months ago by neilh10
  0

• Internet POST intervals conditioned on que size

  #158 opened 9 months ago by neilh10
  0

• SHT4 sensor heater left on

  #153 opened 9 months ago by neilh10
  1

• DS18 Address in ms_cfg.ini

  #154 opened a year ago by neilh10
  0

• Support Wio Terminal

  #109 opened a year ago by neilh10
  1

• On repeat POST time for resp not recorded

  #145 opened a year ago by neilh10
  1

• Incompatibility between SAMD5 and AVR time

  #120 opened a year ago by neilh10
  0

• SeqNumber roll-over

  #129 opened a year ago by neilh10
  0

• Cloud options

  #151 opened a year ago by neilh10
  0

• CodeBloat LT5KA_wireless

  #152 opened a year ago by neilh10
  1

• Space saving ideas

  #138 opened a year ago by neilh10
  0

• SIM7080G not connecting to tower

  #148 opened a year ago by neilh10
  0

• Digi Xbee LTE lotsa WRs

  #140 opened a year ago by neilh10
  1

• For Digi LTE put in PSM

  #147 opened a year ago by neilh10
  0

• DIgi LTE XB3 sleep

  #141 opened a year ago by neilh10
  1

• Determine RTC is valid on boot

  #144 opened a year ago by neilh10
  0

• Monitor LTE time to connect

  #142 opened a year ago by neilh10
  0

• Invalid Time set and MMW doesn't accept old dates

  #119 opened 2 years ago by neilh10
  2

• Watchdog interrupt shows during sleep

  #137 opened a year ago by neilh10
  1

• Tx offset have randomise option

  #136 opened a year ago by neilh10
  0

• DHCP failed however still completes NTP request

  #133 opened 2 years ago by neilh10
  1

• On cold boot vbat filter too slow.

  #132 opened 2 years ago by neilh10
  4

• Modem stays active when LB_PWR_MODEM_USE_REQ CANCELLED cancelled

  #115 opened 2 years ago by neilh10
  2

• exceed NETWORK POST_MAX_NUM on first connect

  #117 opened 2 years ago by neilh10
  2

• master LoggerModemMacros.h breaks DigiXbeeWiFi

  #125 opened 2 years ago by neilh10
  1

• For Modbus Power use D10

  #122 opened 2 years ago by neilh10
  1

• Create simple site verification config

  #121 opened 2 years ago by neilh10
  1

• Remove Stc3100_V

  #114 opened 2 years ago by neilh10
  0

• DBGyymm.log use actual elapsed POST time

  #96 opened 2 years ago by neilh10
  0

• Mayfly1.1 Pwr Pin

  #112 opened 2 years ago by neilh10
  1

• low battery voltage lockup

  #110 opened 2 years ago by neilh10
  1

• Auto Select LiPo V measurement source

  #111 opened 2 years ago by neilh10
  0

• Time Stamp on posting to MMW is incorrect

  #108 opened 2 years ago by neilh10
  0

• Vbat thresholds

  #107 opened 2 years ago by neilh10
  0

• Add Modem configurability

  #95 opened 2 years ago by neilh10
  1

• Cell Network Option

  #98 opened 3 years ago by neilh10
  3

• EC Konst not used

  #106 opened 2 years ago by neilh10
  1

• System resetting ~ memory leak

  #102 opened 3 years ago by neilh10
  4

• Mayfly Reset as modem not responding

  #99 opened 3 years ago by neilh10
  1

• Keller 36XiW-CTD

  #100 opened 3 years ago by neilh10
  0

• Manage some sensors powerUp

  #97 opened 3 years ago by neilh10
  0

• Mayfly revision decoded at runtime

  #94 opened 3 years ago by neilh10
  1