thinkpad-wmi
Linux Driver for Thinkpad WMI interface, allows you to control most BIOS settings from Linux, and maybe more.
sysfs interface
Directory: /sys/bus/wmi/drivers/thinkpad-wmi/
Each setting exposed by the WMI interface is available under its own name in this sysfs directory. Read from the file to get the current value (line 1) and list of options (line 2), and write an option to the file to set it.
Additionally, there are some extra files for querying and managing BIOS password(s).
password
Must contain the BIOS supervisor password (aka 'pap'), if set, to be able to do any change.
Every subsequent password change will be authorized with this password. The password may be unloaded by writing an empty string. Writing an invalid password may trigger the BIOS' invalid password limit, such that a reboot will be required in order to make any further BIOS changes.
password_encoding
Encoding used for the password, either '', 'scancode' or 'ascii'.
Scan-code encoding appears to require the key-down scan codes, e.g. 0x1e, 0x30, 0x2e for the ASCII encoded password 'abc'.
password_kbd_lang
Keyboard language mapping, can be '', 'us', 'fr' or 'gr'.
password_type
Specify the password type to be changed when password_change is written to. Can be:
- 'pap': supervisor password
- 'pop': power-on-password
Other types may be valid, e.g. for user and master disk passwords.
password_change
Writing to this file will change the password specified by password_type. The new password will not take effect until the next reboot.
password_settings
Display password related settings. This includes:
- password_state: which passwords are set, if any
- bit 0: user password (power on password) is installed / 'pop'
- bit 1: admin/supervisor password is installed / 'pap'
- bit 2: hdd password(s) installed
- supported_encodings: supported keyboard encoding(s)
- bit 0: ASCII
- bit 1: scancode
- supported_keyboard: support keyboard language(s)
- bit 0: us
- bit 1: fr
- bit 2: gr
load_default_settings
Reset all settings to factory default.
debugfs interface
The debugfs interface maps closely to the WMI Interface (see driver and doc).
- bios_settings: show all BIOS settings
- bios_setting: show BIOS setting for
- list_valid_choices: list settings for
- set_bios_settings: call set bios settings command with .
- save_bios_settings call save bios settings command with .
- discard_bios_settings: call discard bios settings command with .
- load_default: call load default with .
- set_bios_password: call set BIOS password with .
- argument: argument to be used in various commands.
- instance: setting instance.
- instance_count: number of settings.
- password_settings: password settings.
References
Thinkpad WMI interface documentation: http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkcentre_pdf/hrdeploy_en.pdf