NervesUEvent listens for events from the Linux kernel, automatically loads device drivers, and forwards them to your Elixir programs.
NervesUEvent is a very simple version of the Linux udevd. Just like udevd
does for desktop Linux, NervesUEvent registers to receive UEvents from the Linux
kernel. Unlike udevd, NervesUEvent only runs modprobe when needed and keeps
track of what hardware is in the system. For most Nerves use cases, udevd
isn't needed.
Almost all Nerves systems require some kernel modules to be automatically loaded or critical functionality won't work. WiFi device drivers, for example, are almost always kernel modules. If you're not using NervesUEvent or
udevdor some other library that automatically loads kernel modules, you'll need to add calls tomodprobeto your application.
Nerves projects generally depend on either :nerves_uevent or a version of
:nerves_runtime that included
similar functionality. It's an advanced use case to modify this dependency.
NervesUEvent automatically starts on boot. Configuration is supplied via application config. The following option is available:
:autoload_modules- defaults totrueto automatically runmodprobewhen needed
Here's a config.exs example:
config :nerves_uevent, autoload_modules: falseNervesUEvent is currently very low level in what it reports and reflects the
Linux representation. For example, say that you're interested in an MMC device
and you've found out that Linux exposes it in the
/sys/devices/platform/soc/2100000.bus/2194000.mmc directory. Linux also sends
UEvent messages for all devices in /sys/device, so NervesUEvent will know
about this too. To query NervesUEvent for device information, drop /sys off
the path and convert to a list of strings like this:
iex> NervesUEvent.get(["devices", "platform", "soc", "2100000.bus", "2190000.mmc"])
%{
"driver" => "sdhci-esdhc-imx",
"modalias" => "of:NmmcT(null)Cfsl,imx6ull-usdhcCfsl,imx6sx-usdhc",
"of_alias_0" => "mmc1",
"of_compatible_0" => "fsl,imx6ull-usdhc",
"of_compatible_1" => "fsl,imx6sx-usdhc",
"of_compatible_n" => "2",
"of_fullname" => "/soc/bus@2100000/mmc@2190000",
"of_name" => "mmc",
"subsystem" => "platform"
}Some devices have more useful information than others. This particular one
mostly shows information found in the device tree file for this device. Of note
is the "modalias" key. When NervesUEvent sees this, it will try to load the
appropriate Linux kernel driver for this device if one exists.
More usefully, you can subscribe for events. For example, if you'd like to be notified when a MicroSD card has been inserted, you can subscribe to all events on that device:
iex> NervesUEvent.subscribe(["devices", "platform", "soc", "2100000.bus", "2190000.mmc"])If you're not sure what to subscribe to, subscribe to all events to see what happens:
iex> NervesUEvent.subscribe([])Now if you physically insert a MicroSD card, NervesUEvent will send messages to your process mailbox. Here's one of the events:
iex> flush
%PropertyTable.Event{
table: NervesUEvent,
timestamp: 2558213871126,
property: ["devices", "platform", "soc", "2100000.bus", "2190000.mmc", "mmc_host", "mmc0", "mmc0:1234"],
value: %{
"mmc_name" => "SA04G",
"mmc_type" => "SD",
"modalias" => "mmc:block",
"subsystem" => "mmc"
},
previous_timestamp: nil,
previous_value: nil
}The primary fields of interest are :table, :timestamp, :property, and
:value. NervesUEvent uses the PropertyTable library for storing everything and
publishing changes. The timestamps are from System.monotonic_time/0.
All original source code in this project is licensed under Apache-2.0.
Additionally, this project follows the REUSE recommendations and labels so that licensing and copyright are clear at the file level.
Exceptions to Apache-2.0 licensing are:
- Configuration and data files are licensed under CC0-1.0
- Documentation is CC-BY-4.0